Help!!! Blew My Clutch...what To Get?

[romeobrood]

Hi, guys...as you can tell from the title, I blew my clutch. I guess after all those time practicing drifting and racing, on top of the 100k miles on the car it had to go sometime. But any ways, I need a new clutch and I dont have a clue what brand is good and what is not. Any help would be greatful. I drive a 96 s14.5. Thanks a lot.

[95Blue240sx]

act heavy duty, spec stage 2. check out enjuku they have good prices.

[twitchy]

what have you got done to the car? Just use a factory clutch sometime those are best

[nismo skyline]

i'd go with a ACT semi racing clutch

[Eternal_240Sx]

Hi, guys...as you can tell from the title, I blew my clutch. I guess after all those time practicing drifting and racing, on top of the 100k miles on the car it had to go sometime. But any ways, I need a new clutch and I dont have a clue what brand is good and what is not. Any help would be greatful. I drive a 96 s14.5. Thanks a lot.

s14.5? do you have an s15 engine in there??

well.. im running a spec six puck right now and i like it. Exedy also is a good choice.

[Andrew Bohan]

i have an act street clutch and it's nice
but if you're gonna be beating the shit out your clutch then oem may be better cuz it's like half the price

[PARAD0X]

i LOVE my centerforce stage 2

[marshun]

exedy's and act's is what i like. :)

[Dutchmalmiss]

where can you get OEM clutches? just the actual clutch disk.

[hondaguy]

i got my exedy clutch for 87 bucks 108 shipped its great it.depends how hard u drive ur car and the hp you have to narrow it down good luck

[kandyflip445]

where can you get OEM clutches? just the actual clutch disk.

Courtesy Nissan. http://www.courtesyparts.com/index.html

[240Stilo]

While your up in the tranny you really should replace the throw out bearing. $40 at the Nissan dealer. I just replaced mine (147k) and it was a few millimeters thinner than the new one I bought and made the pedal feel like crap. You have to press out the old one and press in the new one. Or you can find a socket of the right diameter and tap out the old one and just hammer in the new one making sure you remember how everything is placed of course.

[Johny5]

if you know you're going to beat the shit out of your clutch, i'd recommend a 6puck. i'm using one right now and love it. a good investment with these is a flywheel with removable clutch contact surface so you don't have to machine your flywheel everytime because 6pucks make it look like you scraped your fw on concrete.

[G_Fish240]

os giken dual or tripple plate