wiring gurus..would this work for blinking sidemarker?

[paintkilz]

was curious as to how to make my s14 corner lens light as a sidemarker and blink as a signal since i wont be running any actual bumper lights...


can i use the turn signal power to interrupt the ground on the corner lens bulb? Thus making it blink?

id draw a diagram but im at work....i was thinking that could work..i believe i have seen it done before..

be nice if the corner lens was a 3 wire dual filament though


but any advice is appreciated!

[paintkilz]

50 views and nothing?

i know there are some wiring guys out there that can either confirm or deny my idea...

[lalo167]

Don't know much but try to find a blinker socket and use that on your corners.

[TheRealSy90]

You could wire the sidemarker power through the blinker power, but they would not stay on they would only blink on with the turn signals. It might be possible to interrupt the ground so they were on and blinked off when the turn signal blinks.

[mendozasport]

i have a zenki s14 and i made my bumber lenses posicion lights and blinker by changing out the socket with an s13 one , they are the same and all i had to do was run the positive off the side lights , and the corner one(next to the headlamp) i drilled a 5/16 hole and bought at pepboys an LED light and socket (cheap ghetto ricer light) and stuck it on with silicon, i wired it up as the blinker also, i dont have pictures of how it looks though , i like it , at night my car stands out from the rest of the zenki