>>>> FS: NIStune type 2 board w/ z32 ECU + Consult Port <<<<

[S14_BOSS]

!!!! SOLD !!!!



Hey All,
I've got a z32 ECU with a NIStune type 2 daughter-board installed in it; The board is currently running a stock RB25 basemap and was installed by AutoVaughn Performance. I have done the modifications to the ECU in which you need to run with an RB25 rather than cutting up your wire harness. This allows you to switch out the ECU just in case anything were to happen and you'd need to resort back to your stock ECU. I'm selling it with ECU, NIStune board, and Consult port; Will not part out.


You can view the mods i did here:
http://nistune.com/docs/Z32_ECU_Modifications_Direct_R33_Plugin%20V8.pdf


NIStune type 2 board can be used on:
• M30 Infiniti (VG30E)
• ECR32 Skyline (RB25DE)
• ECR33 Skyline (RB25DET)
• HCR32 Skyline (RB20DET)
• BNR32 Skyline (RB26DETT)
• Q45 Infiniti (VH45DE)
• U12 Bluebird (KA24E)
• Y60 Patrol (TB42E)
• Z32 Fairlady 300ZX (VG30DETT)



http://i1117.photobucket.com/albums/k584/rbkoukis14/9E33104D-A826-4C67-AF4D-A643F72CFE44-25752-000006B9C0C5D33C_zpsf3a2d724.jpg

http://i1117.photobucket.com/albums/k584/rbkoukis14/545CA9AC-C7F1-44F5-989A-2EE7B5A2BD33-25752-000006B9C683769E_zpsc9b11e48.jpg

http://i1117.photobucket.com/albums/k584/rbkoukis14/114C4637-9274-4AC0-8D9B-3F2CC7443BF0-25752-000006B9CBB31A50_zpse7c9e224.jpg

http://i1117.photobucket.com/albums/k584/rbkoukis14/15125653-4CD3-4A99-8D20-3B8C1B65FB77-25752-000006BC65E07E2A_zps36e854b6.jpg

[91EfSi]

I'd love this for my rb20 s13 but would I have to change anything to get it to work on my S13?

[seagrasser]

Very interested, is the base map for a series 1 or 2 RB25?

[S14_BOSS]

I'd love this for my rb20 s13 but would I have to change anything to get it to work on my S13?

This NIStune type 2 will work with your RB20 perfect. I don't believe you would need to change anything as the S1 RB25DET and RB20DET use the same MAF.


Very interested, is the base map for a series 1 or 2 RB25?

Base images are the same for series 1 and 2 however the MAFS are what differ so this will work with both s1 and s2 RB25. Currently, this image has the S1 RB25 MAF (J60 green label). If you're running an s2 RB25 you will just need to change the MAF option in NIStune software.

[bllabong89]

Pm'd. Serious about buying.

-Andrew

Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2

[91EfSi]

Hopefully you still have this buy friday :\