breather setup redtop

[andy20det]

Redoing it clean !! but kinda lost in those breather diagram things posted online.
wanted to do something like Nigel Petrie (engeneered to slide).Setup Look strong and clean.

first of all do you think i got rid of all those baffleing plate inside the valve cover ? if not where does he the welded fiting goes thru under the cover.

ETS 180sx - Engineered to Slide (http://engineeredtoslide.com/garage/180sx/)

[Kingtal0n]

this is my favorite redtop sr20 i have seen to date with regards to pcv.

thats the s14 cover on an s13. the owner told me it was cut and re-welded to fit. Also- notice the PCV valve for the downpipe!
Thats right, exhaust pulls on the crank case, as does the pressure drop at the compressor.

[Mikester]

Redoing it clean !! but kinda lost in those breather diagram things posted online.
wanted to do something like Nigel Petrie (engeneered to slide).Setup Look strong and clean.

first of all do you think i got rid of all those baffleing plate inside the valve cover ? if not where does he the welded fiting goes thru under the cover.

ETS 180sx - Engineered to Slide (http://engineeredtoslide.com/garage/180sx/)

You don't get rid of the baffling, you drill a series of holes in it to allow it to breathe vapors without slurping up copius amounts of oil- the baffling is important for overall flow underneath the rocker cover. The setup you are looking at is definitely clean, simple and effective-looking... This thread may give you an idea of how to set it up inside the cover- http://zilvia.net/f/tech-talk/235851-sr-owners-more-hp-easy-mod-catch-can-setup.html