KA24 Pinout diagram.... (02 signal wire)

[Gladman]

I need to wire in my wideband o2, narrowband signal to me ECU.

I've done a few searches for "pinout" and a bunch of other crap.. but not nothing.

Anyone know which pin is the o2 signal? Im aware that its a thicker white wire, but there are 3.

[deviousKA]

continuity check, somewhat of a pain but you can be sure.

[Gladman]

whats a continuity test?

[Matt_240]

pin is 46 for front 52 for rear 02.

a continuity test is to check the ecu pins(if you're not sure) and probe the 02 at the same time. then check which pin gives you a reading and wa la you'll know what wire the 02 is for.

[KOUKI KA-T]

Are you using the PLX wideband in the place of your stock O2? Same setup I have.. honestly just weld a seperate bung in and keep the stock O2 in there. That way if you need to unhook the wideband or replace the sensor you don't have to rewire the ECU and thread back in the stock O2.

[Gladman]

how are you supposed to read the pin numbers on the ECU?

1357
2468.....?