Wheel fitment - Pic request!

[Soarer]

OK, I've searched and searched, but I can't find this exact pic.

ON an S13, I am looking for a pic of this:

16x7 or 15x7 with -10 to -15 offset front and/or rear

16x8 or 15x8 with zero 0 or -5 to +5 offset front and/or rear

Any additional info with pics, such as camber settings, tire size would also be appreciated.

Thanks in advance!

[TheTimanator]

There is probably a reason you can't find pics of people running negative offsets. Check this thread out (if you already haven't) What Spec Wheels Does Everyone Have? (http://www.zilvia.net/f/showthread.php?t=44300&highlight=16x8+offset) Dousan's post will probably be the most helpful
And try this thread Who runs negative offset wheels on their ride? (http://www.zilvia.net/f/showthread.php?t=49281&highlight=negative+offset)
It may not have that exact picture but you get the idea....

[HaLo]

http://images.cardomain.com/member_images/2/web/386000-386999/386862_10_full.jpg

Some wheels I sold...

15x7 +10 all around.

[CleanS14]

If you didn't know by now... people in the US (most of them) don't have balls to get neg offset wheels and make them work/fit. But if you take a look at HALO's pic above, what you'll get is this appoximately:

15x7 16x7 -10mm to -15mm will stick between 5-7mm more all around
15x8 16x8 0 offset will stick out about 17mm more
-5 will be about 20mm more

Keep in mind these are nothing a little camber and fender work can't fix... IMO you'd only need to roll the fenders and add some camber.

[HaLo]

Actually, if he gets -10, -15 offset on a x7 wheel, it will stick 20mm-25mm more, almost an inch. Width is same, but offet is much more agressive. With camber and fender rolling, it should work though...

You should see my GF's Supra, 17x9+20, 17x9+19, needed fender rolling in front, nothing in rear:
http://www.monchar.com/image.php?image=images/members/200/109_2.jpg

[HaLo]

Sorry, link sucks... I'll get a better pic later. :p

[Soarer]

Thanks for the help finding those threads! But strangely none are within the range I'm looking for.

I guess I'll be the first to try?

There's got to be someone...

[Salty_X]

PongAtari's 180sx... SSR Mesh, 15x7.5 -5 in the front, which sticks out as much as 7 -10 and 8 +0 give or take 1mm. Bling. (http://www.imagestation.com/album/?id=4289531283&idx=14)
There's a couple pictures in there to give you an idea.

[Soarer]

Salt,

Thanks so much, thats exactly what I wanted to see.

Any idea of tire size or camber setting? I'll try a thinner tire and more camber... We'll see.

That pic got me excited :hyper: