PDA

View Full Version : CA WTS/WTT Fully Built S14 SR20DET

jorgezee1
03-16-2013, 04:08 PM
******SOLD*****

Long story - so here is the short version.
Sold this to my friend he never ended up using it and never paid me so I will list it again. nothing is wrong with it you can come by and take a look only if you have the cash. no tire kickers and don't waste my time. No lowball offers. I have allot of money in this just want to get some of it back. 5,000 is what I am asking. I am interested in trades but not Nissan stuff. BMW 07 335i upgrades, 08 BMW M3 parts, 69 camaro parts, LSX upgrade parts, 00-02 t56 trans. that's it.... I don't want anything else so don't offer please. oh and I will not part out. don't ask. If I can't sell it I will end up buying a 240z but I just don't have the room right now.

Thanks,
Jorge


and here is the original post -
http://zilvia.net/f/sale-items/444204-fs-ft-sr20det-s14-s13-fully-built-tuned-motorset.html


s14sr20det
block:
87mm bore
Supertech nitrate treated pistons
Eagle H-Beam rods
Reworked stock crank hardend
treated ACL race bearings
ARP Main studs
New Oil pump
New Oil pickup
Greddy oil pan with magnetic pickup plug
Nismo Motor Mounts
Greddy pulley kit

Head:
Stage 2 port and polish
New Hyd. lifters
HKS 264 INT and EXH cams
New timing chain and tensioner
ARP Head studs
Greddy rocker arm stoppers
Cosworth Head Gasket
Powder coated Valve cover



Intake:
Greedy Intake with stock s14sr runners Extrude Honed port matched
N15 throttle body with tomei adapter plates
750cc Nismo injectors
Z32 Maf
Nismo Fuelhttp://images.intellitxt.com/ast/adTypes/icon1.png (http://zilvia.net/f/#) pressure regulator with liquid filled gauge
New sensors "all"



Exhausthttp://images.intellitxt.com/ast/adTypes/icon1.png (http://zilvia.net/f/#):
stock exhaust manifold - yes stock. it has been Extrude honed
Garret 2871R .64 housing
HKS Actuator


Cooling:
Nismo Thermostat



Drivetrain:
Nismo Super Copper Mix Clutch
New pilot and throwout bearing
S14 sr transmissionhttp://images.intellitxt.com/ast/adTypes/icon1.png (http://zilvia.net/f/#)
Nismo clutch slave cylinder


Electrical:
s14sr to s13 chasis harness
Power FC ECU
Power FC Boost controller
Power FC tuning software
jorgezee1
03-19-2013, 04:37 PM
bumping it up for offers.
Driftzenki
03-19-2013, 05:50 PM
would you sell the n15 throttle body with the adapters separate?....pm me.
unknowns13
03-20-2013, 01:36 AM
infinity j30?
archonftw
03-20-2013, 04:37 AM
would you sell the n15 throttle body with the adapters separate?....pm me.

oh and I will not part out. don't ask.

you must be blind or stupid. or both. :picardfp:
MrChow
03-20-2013, 04:48 AM
ugh... I want... But will not be able to get to that amount.. GLWS.
jorgezee1
03-23-2013, 10:48 AM
BUMP it up
jorgezee1
04-01-2013, 02:08 PM
ugh... I want... But will not be able to get to that amount.. GLWS.


Lets go guys, make me some offers.

Thanks,
Jorge
bfellini
04-02-2013, 05:09 PM
PM sent... hit me up!!!

-bucky
Ginjuice
04-02-2013, 05:46 PM
If you were to part it out. How much are you willing to sell the head? The whole set up?
jorgezee1
04-02-2013, 06:19 PM
If you were to part it out. How much are you willing to sell the head? The whole set up?

I'm not parting it out. it's all or nothing. There is no reason to break down a perfectly good setup. If someone else buys it and parts it out, that's on them. This motor runs really nice. I was keeping up with my friends z06 without a problem. Motor is solid. I sometimes regret selling my 240.... but I'm getting older and my other projects have become more time consuming and expensive.
jorgezee1
04-02-2013, 06:20 PM
PM sent... hit me up!!!

-bucky


Where the hell have you been??? I haven't talk to you in years.... I will give you a call later tonight.
Ginjuice
04-02-2013, 08:25 PM
I'm not parting it out. it's all or nothing. There is no reason to break down a perfectly good setup. If someone else buys it and parts it out, that's on them. This motor runs really nice. I was keeping up with my friends z06 without a problem. Motor is solid. I sometimes regret selling my 240.... but I'm getting older and my other projects have become more time consuming and expensive.

It's all good. Good luck with the sale bro!
moco
04-03-2013, 02:50 AM
Do you have pics of internal parts?
Silvia716
04-03-2013, 09:40 AM
I have a freshly rebuilt 700r4 built to corvett specs with boost valves less than 100 miles on it good for 400+ hp wondering if you would be willing to trade the head for it + power fc if it is for 94-96 wc ecu sr20 only thing the trans could use is a new torque converter for higher hp application
jorgezee1
04-03-2013, 12:25 PM
Do you have pics of internal parts?

No I do not. I do have all the receipts. If the buyer leaves a deposit he is more then welcome to pull the pan and valve cover before he takes it. as well as pull the trans to check the clutch.


The motor is solid no issues. I sold my 240 in stock form, running passing smog. I knew I would not get much with my setup in the car so I pulled my motor, trans , suspension, ect. and put the car back to stock. If you are a serious buyer and have money PM me. if not please do not contact me and I will not do payment plans please stop asking.

Thanks,
Jorge
jorgezee1
04-03-2013, 12:28 PM
I have a freshly rebuilt 700r4 built to corvett specs with boost valves less than 100 miles on it good for 400+ hp wondering if you would be willing to trade the head for it + power fc if it is for 94-96 wc ecu sr20 only thing the trans could use is a new torque converter for higher hp application


I am looking for a built LS1 T56 manual 6speed. I have no use for a 700R4 AT.

I do have a spare stock S14 head if your interested.