PDA

View Full Version : Fucked up I think,,,


Gamma
03-11-2013, 03:00 PM
Was up my fellow zilvians, so I fucked up Bahahhahah lol, or so I think my hg blew so I pulled everything apart, thinking I was at tdc (which i wasnt),but i am now both piston #1and4 are at tdc, I have my distributor lined up to fire on cylinder #1, my sprocket and timing chain are lined up also...
Does it matter if i pulled off the head and my pistons #1&4 where not at tdc?
OR am I good to go to put everything back together since they are at tdc now and my distributor is lined up to fire on #1 and my sprocket and timing chain are lined up the little dents line up.. Am i missing something or am i good to go... And yes i decked the head just got it back from the machine shop..
My engine is a Ka24e... Any help would b much appreciated

Con-city_s13
03-11-2013, 06:14 PM
Are your cams lined up at tdc for cylinder #1?

Gamma
03-11-2013, 06:39 PM
knew i was missing something but yah i think they are

Con-city_s13
03-11-2013, 08:15 PM
Both exhaust and intake valves should be closed and the next valves to open are the exhaust valves. If this is the case, then you should be good.

Frank_Jaeger
03-12-2013, 02:17 PM
Was up my fellow zilvians, so I fucked up Bahahhahah lol, or so I think my hg blew so I pulled everything apart, thinking I was at tdc (which i wasnt),but i am now both piston #1and4 are at tdc, I have my distributor lined up to fire on cylinder #1, my sprocket and timing chain are lined up also...
Does it matter if i pulled off the head and my pistons #1&4 where not at tdc?
OR am I good to go to put everything back together since they are at tdc now and my distributor is lined up to fire on #1 and my sprocket and timing chain are lined up the little dents line up.. Am i missing something or am i good to go... And yes i decked the head just got it back from the machine shop..
My engine is a Ka24e... Any help would b much appreciated

Are your cams lined up at tdc for cylinder #1?

LOL.

You're gonna have to do timing from scratch. Check out this thread for pictures: Setting KA24E Timing *HELP* : 240SX Technical Forum (http://forums.nicoclub.com/setting-ka24e-timing-help-t543593.html)

Gamma
03-12-2013, 02:26 PM
Good lookin Frank appreciated

OrangeVirus1
03-12-2013, 02:34 PM
lets just hope you didn't Crank the car before those cams were aligned, or your problems just got 10x worse

kamilitaryman
03-12-2013, 02:52 PM
LOL.

You're gonna have to do timing from scratch. Check out this thread for pictures: Setting KA24E Timing *HELP* : 240SX Technical Forum (http://forums.nicoclub.com/setting-ka24e-timing-help-t543593.html)

^ this. You didn't fuck it up. If anything, you just lost some time.

Gamma
03-12-2013, 03:31 PM
for sure thx for the info guys lol lets hope it didnt get 10x worse

MamangSorbetero
03-13-2013, 10:39 AM
It would help to download a factory service manual for that KA24E. An ebook version is floating around if you don't want to get the old 1989 copy

KoukiMonsta
03-13-2013, 12:19 PM
yea do as Frank posted in the link

your not fucked, just created more work for yourself.

Gamma
03-14-2013, 02:57 PM
forsure I have been stumped with with school work but ima put the ka back together,, Thx again for all the inputs appreciate it guys