2JZGTE Help!

[Djinfinit]

Hey guys just need some help with where things go.

-I've included a few pictures, the first one is difficult to see because its on its side but it is on the driver side of the motor in the rear lower area and is circled.

-Second picture is a plug which is in junction to what seems to be the oil level sensor?

-Third picture is the what i like to call coolant harness. i don't no where the circled connectors connect to.

-Forth picture the sensor, i just need a part number for it or a name because its broken as well as i need know where those two vaccum lines go to.

-Fifth picture same thing need a part number or name of the sensor because its broken, same as the forth just a better angle at the questioned vaccum lines.


http://i39.photobucket.com/albums/e182/randyrashid/Wire1_zps4b3fcb23.jpg
http://i39.photobucket.com/albums/e182/randyrashid/wire2_zps1fe061c1.jpg
http://i39.photobucket.com/albums/e182/randyrashid/wire5_zps6539b316.jpg
http://i39.photobucket.com/albums/e182/randyrashid/wire4_zps87e03ab1.jpg
http://i39.photobucket.com/albums/e182/randyrashid/Wire3_zps85d81a57.jpg

[91ka24]

U need to download the 2j fsm. I see vsv's circles, oil sensor, starter signal wire, obd port, etc... Not being a smart ass, its just you have a shit load circled LOL if u good.the fsm it.will show u where everything is and what it is.

[Djinfinit]

i downloaded the fsm, but it doesnt show anything about the coolant harness thing

[nsain]

It'll help more if you have pics of the terminal pins in the plug but I think

Pic 1-knock sensor
Pic 2-looks like oil level sensor and plug
Pic 3-sensor all the way on the left may be engine coolant temp sensor on the water neck or crank angle sensor below that vsv that it's near and the other 3 plugs 2 of them goes to the igniter and one goes to noise filter
Pic 4-I think that's the idle air control valve vsv (vacuum switch valve)
Pic 5-I think it's the exhaust gas bypass vsv and those vac lines are suppose to curl into the vsv