GTO 5 lug conversion hub question??

[JasonNagra]

Okay I am currently using the GTO 5 lug front hub converter to make my S13 5 lug. I need to get longer wheel studs (the Nismo 60mm units) however I am wondering which ones to order. Do the GTO hubs use the stock regular S13 front studs? There are two kinds to order and I am just unsure which ones to get. Thanks, Jason.

[JasonNagra]

Found out myself! For those of you wonderign the same thing you should use the Nismo S13 studs. Not the 300zx or s14 units. Cool!

[sykikchimp]

Sweet! Where'd you get the info?

I had asked around, and everyone either said "no", or "I think so" as to whether they could even be changed..

I was curious about how they were installed.. I know some lugnuts are pushed in, and have teeth, while others are opposite thread screw in..

[Dousan_PG]

but they dont fit perfect like OEM would
you need to get them pressed in
i got this info from ALEX (mav178) because i stripped one of my GTO stud
its not as easy install like oem are.

[omen2853]

so then get some NISMO s13 ones? good deal.

i have this lug nut push installer thing thats you use a wrench with and tighten it down (like you would with using a nut). you think this would work to put in the new ones? mine are still brand new but i want to put some longer ones in so ica n run some spacers.

[NervGS]

I just pushed in my nuts with my own hands, wasn't very tight, kind of loose actually. Hurt like hell, and I didn't want to touch anyone (and vice versa) before washing my hands, it was all good though, worked like a charm!

You can do it too!

-glenn

[JasonNagra]

Okay so if you don't have them pressed in (who would do this??) they don't work or fit? (the s13 nismo into the GTO hub)

[DoriftoSlut]

OMG!!!!!!! People calling wheel studs lug nuts!!!! :wtf:

[JasonNagra]

So who would press the studs into the hubs? A machine shop?

[sykikchimp]

I was curious about how they were installed.. I know some studs are pushed in, and have teeth, while others are opposite thread screw in..

>>??

(excuse the use of "lugnut".. I was not coherent.)