PDA

View Full Version : 1990 s13 rb25det series 2 build


1990 240sx Rb25
02-05-2013, 05:40 PM
I decided to start a build thread of my s13 rb25. This is my first ever build i have owned a mk3 supra and a 07 sti. This is my car when i first bought.

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/149747_214541625324703_1748031879_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc7/576672_231215950323937_65189555_n.jpg

Heres a shot of the engine bay from the mess of wires to the exaust intercooler piping

http://https://sphotos-b.xx.fbcdn.net/hphotos-prn1/75584_210734979038701_1555533352_n.jpg

And the hack job continues

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/582809_210735709038628_1507426132_n.jpg

So i drove it around for a while passed emissions started to practice how to drift clutch kick and all the fun stuff along the way i cleaned it up.

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/394753_248671461911719_868044101_n.jpg


Painted all the trim back to stock black. it had a horrible paint job so i decided to return it to stock look i also re-sprayed the interior black to clean it up.

Then my car started to smoke so i went and got a used turbo and my buddy helped swapped it out and also put a new battery in the car with relocation kit to the hatch the battery in their was 7 yrs old.

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/394753_248671461911719_868044101_n.jpg

So as i was doin the battery relocation kit i decided to clean up my in intercooler piping and make it shiny and the the nightmares started coming i found i need all new intercooler piping. it was rubing were they cut the frame to route piping.

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/487160_255215257924006_870785303_n.jpg

And then the new parts started coming from vibrant intercooler piping to front facing manifold to the 3 gauge vent holder to a tial q/r bov new front bumper,nrg 2.5 quick relase, short hub and steering wheel, oil catch can and broad way rear view mirror.

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/283332_297665437012321_950642262_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/21782_295399613905570_1423819649_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/46494_289239077854957_111675629_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc6/251986_240446872734178_1841088233_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc7/575959_260499690728896_855711186_n.jpg

So i tried doin the intake manifold my self and i did have the proper tools or the time with work so i brought it to ecs performance were they put it on and found out it had to be machined flat cause it was not sealing right so i also had it powder coated black and at that time i had all new intercooler piping re-done. After all was said and done my car still smoked so they did a compression test and found out cydlinder 2 had bad rings so i purchased a new motor from tiger ***.

This is my attempt at putting it in

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/527220_259902534121945_545288053_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/532593_301569399955258_888312814_n.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-snc7/376642_10151190877202862_197182991_n.jpg


thanks to ecs its alot cleaner this is the old motor

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/557617_285710908207774_960314218_n.jpg

and then i bought a new motor horrible pic and they put the motor in also bought a new exedy clutch stage 2 re-machined fly wheel and throw out bearing.


This is the most up to date pic i have we still cant get it started it cranks but wont turn over were guessing it the old hacked up wire harness.

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/537835_329586953820169_1569315056_n.jpg

it has came along way since i bought it in may of 2012 just need power steering and i can be out at this yrs events.

Parts list

Rb25det series 2
rb25 tranny
r33 lsd
r33 rear end
custom 1 piece drive shaft
300zx brake kit all the way around
5 lug swap
tein coilovers
full suspension
buddy club spec 2 exaust
vibrant custom interooler set up
custom intake
z32 maf
z32 nismo ecu chiped
short shifter
exedy clutch kit stage 2
God speed front facing manifold powder coated black
xxr 962 rims dont no the exact size or tires their is spacers on it
theirs prob alot more i this the next step is a wire specialties wire harness to clean the wire up and solve the no start issue

https://sphotos-b.xx.fbcdn.net/hphotos-ash3/539351_10151452141384815_669420423_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/399582_10151452138489815_558843404_n.jpg

40craz
10-15-2013, 10:20 AM
I have the same build just trying to figure out wht wires to connect to the z32 maf do you have a pin out or how to I used the ka maf before

1990 240sx Rb25
10-15-2013, 10:57 AM
I have a wire specialities harness but under nistune website their is a pin out diagram

40craz
10-15-2013, 12:19 PM
Ok thts the same wiring Harness i have


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)