s13-15 headlight wires

[speedydave]

Can anyone help with the s13 to 15 headlight wire diagram. I've found a couple on here but the page and images have been removed. Can anyone help :(

[speedydave]

Can no one help?

[Chaluska]

probably because its not really that hard to do..

the S13 has a 3 prong H4 plug, which has 1 ground, 1 high beam +, and 1 low beam +. you can get Male spade connectors to fit right in that plug (any standard male spade connector will fit)

for your running lights, unplug your current S13 front turn signals, and use the 3 pin harness as your power source for turn signals and running lights.
(1 ground, 1 running light+, and 1 Turn signal +)

its all a matter of splicing, and extending wires to the new S15 headlight location.

do some reading in the FSM, find the pin orientation (wire color code).

it isnt hard dude, you have 4 different positive wires, and a bunch of associated grounds.

-low beam
-High beam
-running light
-turn signal

http://uphillwriting.org/wp-content/uploads/2011/08/Spoonfed_Baby.jpg

[LuckyRPS13]

I know this is a 4 month old thread but it came up on a search figured I would help direct people to me for their solution.

I make a plug and play harness for S13's and S14's. you would just plug it up to your factory engine room plugs, then to the OEM S15 headlight plugs, then you are good to go. PM me to work out the details. If you wire the High and low off the wiring meant for the the factory headlight your low beam will shut off with your high beam on. With my Harness your low beams will stay on when your high beams are on providing you with more lighting. Here is my build thread, on the first page is a short video of how they work for me.

Here is a link to my build thread and on the first page is a video of the headlight operation.http://zilvia.net/f/builds-builds-only/474939-ky-s13-5-ground-up-build.html