rodneyfromtrini
02-01-2013, 01:00 AM
what's up zilvia....I'm parting out my sentra se-r and there is some parts that's compatible with the rwd platform...PM or text/call 2014702033
Greddy 20g turbo with xspower manifold and 38mm wastegate $600
Gti-r motor with new oem headgasket and arp head studs/bolts(needs piston rings) $500
complete gti-r turbo setup (t28 turbo, gti-r manifold, down pipe, oil and water lines) $700
jwt ecu tuned for gti-r(Upgraded ECU programmed to eliminate speed limiter, raised rev, timing and fuel slightly adjusted for WOT)$150
lsd tranny no issues $300(sold)
444cc sti injectors $150
1991 se-r wiring harness $100
2 intercoolers $50 each
Complete 2.5 inch turbo piping $80
greddy turbo timer $70
two axles $40 each
2 sets of rear disk brakes set up $80 each
full 2.5 inch bolt on exhaust system with magaflow barrel $100
sunny single fog front bumper with 626 lip as seen in pic $400
Se-r interior $60
15" Maxxim ahead rims with good tires...grips good $500
New radiator $60
AutoMeter Boost and Oil pressure gauges with dual gauge pod $75
HKS blow off valve $50
Walbro 255fuel pump $80
USB to consult cable with software included (used for data logging and diagnostics) $make offer
Whiteline springs(front installed back still brand new about a 1"-1-1/4" drop) $100
upgraded clutch less than 3000miles(Stage 1 Street/strip clutch) $100
The car was a 100% running car so anything that you need that will be on the car is there. I will update as parts gets sold.
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-46-56_294_zps4bf637f3.jpg
pod with gauges
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-46-07_215_zpsf449830a.jpg
first intercooler..has a dent in the top but flows fine...used it over a year with no probs.. 2.5in inlet and outlet
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-43-15_810_zps110d6bfc.jpg
38mm wastegate with 18psi spring...never used
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-29_937_zpscc78b51a.jpg
xspower rwd sr20 mani with wastegate
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-22_670_zps7ca07600.jpg
id plate of the greddy 20g turbo
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-12_980_zpsde0798bf.jpg
20g turbo
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-13_49_zps66a4509f.jpg
HKS bov
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-49_992_zpse74773d3.jpg
bov
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-40_691_zps43d023e8.jpg
bov
Greddy 20g turbo with xspower manifold and 38mm wastegate $600
Gti-r motor with new oem headgasket and arp head studs/bolts(needs piston rings) $500
complete gti-r turbo setup (t28 turbo, gti-r manifold, down pipe, oil and water lines) $700
jwt ecu tuned for gti-r(Upgraded ECU programmed to eliminate speed limiter, raised rev, timing and fuel slightly adjusted for WOT)$150
lsd tranny no issues $300(sold)
444cc sti injectors $150
1991 se-r wiring harness $100
2 intercoolers $50 each
Complete 2.5 inch turbo piping $80
greddy turbo timer $70
two axles $40 each
2 sets of rear disk brakes set up $80 each
full 2.5 inch bolt on exhaust system with magaflow barrel $100
sunny single fog front bumper with 626 lip as seen in pic $400
Se-r interior $60
15" Maxxim ahead rims with good tires...grips good $500
New radiator $60
AutoMeter Boost and Oil pressure gauges with dual gauge pod $75
HKS blow off valve $50
Walbro 255fuel pump $80
USB to consult cable with software included (used for data logging and diagnostics) $make offer
Whiteline springs(front installed back still brand new about a 1"-1-1/4" drop) $100
upgraded clutch less than 3000miles(Stage 1 Street/strip clutch) $100
The car was a 100% running car so anything that you need that will be on the car is there. I will update as parts gets sold.
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-46-56_294_zps4bf637f3.jpg
pod with gauges
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-46-07_215_zpsf449830a.jpg
first intercooler..has a dent in the top but flows fine...used it over a year with no probs.. 2.5in inlet and outlet
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-43-15_810_zps110d6bfc.jpg
38mm wastegate with 18psi spring...never used
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-29_937_zpscc78b51a.jpg
xspower rwd sr20 mani with wastegate
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-22_670_zps7ca07600.jpg
id plate of the greddy 20g turbo
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-02_11-42-12_980_zpsde0798bf.jpg
20g turbo
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-13_49_zps66a4509f.jpg
HKS bov
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-49_992_zpse74773d3.jpg
bov
http://i970.photobucket.com/albums/ae188/rodneyfromtrini/2013-02-06_22-33-40_691_zps43d023e8.jpg
bov