PDA

View Full Version : What does a redtop SR20 need to run?


nemesisdrift
01-28-2013, 03:16 PM
Im trying to get an idea how to do this now. I have a 95 Zenki that is getting a painless race harness Pn 50005. Fuel pump is on its own circuit, starter is on its own circut, along with all the lights, fans ect.

Last thing needed is what does the actual engine need? what needs power? the engine has a strap running to the frame rail to ground, the starter and alt have their own 4 gauge power wires running to a distribution block, running through a 80a breaker straight to the battery.

that should take care of all of it right? I haven't really found anything specific yet using the search function and no one seems to really know anywhere else.

jr_ss
01-28-2013, 04:05 PM
Fuel, air, spark...

nemesisdrift
01-28-2013, 04:15 PM
Fuel, air, spark...

you sir, are a retard.

EnemyS15
01-28-2013, 04:49 PM
I dunno.. last time I checked,that's all my engine needed to run.

Unless you drive a Deloreon. Then you need plutonium.

Or you own a Mr fusion... Then you just need garbage.

godsmack
01-28-2013, 05:12 PM
Are you still using the original engine harness? If yes then you're gonna have to look up the fsm and eliminate what you're not gonna use and also tie into in order to power the ecu properly.

ShadowMan
01-28-2013, 05:15 PM
I dunno.. last time I checked,that's all my engine needed to run.

Unless you drive a Deloreon. Then you need plutonium.

Or you own a Mr fusion... Then you just need garbage.

Actually, the Mr. Fusion only provided the 1.21 jiga watts needed to power the flux capacitor. It still needed gas to run the engine to achieve the required 88 mph for time travel.

Frank_Jaeger
01-28-2013, 06:32 PM
ITT: Florida

Fuel, air, spark...

I dunno.. last time I checked,that's all my engine needed to run.

Unless you drive a Deloreon. Then you need plutonium.

Or you own a Mr fusion... Then you just need garbage.

90240sx07
01-28-2013, 07:41 PM
you need fuel injectors most of the sensors on the engine power and ground for ecu and tuning software depending on your set up

EnemyS15
01-28-2013, 07:43 PM
ITT: Florida


FIXED: Florida School in Tampa (http://www.itt-tech.edu/campus/school.cfm?lloc_num=40)

nemesisdrift
01-28-2013, 08:16 PM
.....what wires need power to run an SR?

steve shadows
01-29-2013, 07:05 PM
There are a lot of wires that require power on an SR or any car to run. Is this a serious thread? Just try firing it up!