choleaoum
01-17-2013, 08:42 PM
Name: Cholea O.
Location: Long Beach, CA.
Price: 2500$ obo NO SHIPPING AS OF RIGHT NOW, I have the worst luck with shipping.
Contact: via pm.
IF YOU DO NOT LIKE THE FINISH, I CAN HIGH POLISH THE ENTIRE FACE
So I just refinished, literally took the entire rims apart resealed everything and repolished everything. I seriously took about 4 hours a wheel, I wetsanded and repolished with polishing rouge to make the wheel shine 100x better then just regular wheel wax. I just got them painted by a local shop around the corner, they did a decent job. Small tear drops more torwards the back side of the wheel, really really not that noticable unless you look from the backside of the wheel. Oh and the fucking idiot at the tire shop put a small scratch in the face while installing the tire!!
I put little to absolutely no miles on these wheels, the edge of the wheel could use a nice buffing from slight rubbing. If the buyer is that picky, I will gladly fix that part, it would be very time consuming on my end. Also, one other wheel has a minor ding from the previous owner of the wheels. Again, if buyer chooses so I can take it to have it repaired but unfortunately at buyers expense which would be about 40 - 50$ bucks. And lastly, I did not like CCW hardware, so I put on my gold painted work hardware, and the paint is slightly chipping off from installation of the hardware.
Other then that, the rims have been freshly polished, brand new paint job, and brand new seal on the wheels. Tires have 90%+ tread life (if not more), and they are balanced. If any buyers have any issues with the wheels, don't use it as a lowballing point because it won't work but I will be willing to work something out.
The specs, while I have not accurately whipped out my ruler and measured just yet they appear to be..
PCD: 5x114.3
18x9.5+22 (3.5" Lip with Low Disk Face) with 225/40/18 Nankang NSII
18x8.5+22 (2.5" Lip with Mid Disk Face) with 205/40/18 Nankang NSI
I'm asking 2500$ obo with tires, feel free to shoot reasonable offers. Serious buyers, feel free to stop by as I will offer to test fit the wheels and roll the fenders for free if neccessary. NO TRADES, I HAVE A LOT OF RIMS I NEED TO SELL LOL
Warning to any lowballers: I am not in a rush to sell, and sorry but I don't want to come off as a penny pincher! But if you come meet me in person with the intentions to lowball me like crazy please save both of us the time. Feel free to send any REAL offers, and we can work from there. The worst I can say is no :)
Here are pictures of me assembling them,
http://i419.photobucket.com/albums/pp272/choleaoum/F04F9591-1A2A-494E-B2CF-A53DD8CCA8A6-27109-000008B382A885AB.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/D95CBF76-7143-4DCE-B752-879BEA6EAC3F-27109-000008B39E6BDC5D.jpg
Sorry, doing a custom widebody on my fender so no fender shots.
http://farm9.staticflickr.com/8493/8363467014_0c4a415e8f_c.jpg
http://farm9.staticflickr.com/8474/8362064103_31a4b299b8_c.jpg
http://farm9.staticflickr.com/8074/8363118140_8a74998f78_c.jpg
Location: Long Beach, CA.
Price: 2500$ obo NO SHIPPING AS OF RIGHT NOW, I have the worst luck with shipping.
Contact: via pm.
IF YOU DO NOT LIKE THE FINISH, I CAN HIGH POLISH THE ENTIRE FACE
So I just refinished, literally took the entire rims apart resealed everything and repolished everything. I seriously took about 4 hours a wheel, I wetsanded and repolished with polishing rouge to make the wheel shine 100x better then just regular wheel wax. I just got them painted by a local shop around the corner, they did a decent job. Small tear drops more torwards the back side of the wheel, really really not that noticable unless you look from the backside of the wheel. Oh and the fucking idiot at the tire shop put a small scratch in the face while installing the tire!!
I put little to absolutely no miles on these wheels, the edge of the wheel could use a nice buffing from slight rubbing. If the buyer is that picky, I will gladly fix that part, it would be very time consuming on my end. Also, one other wheel has a minor ding from the previous owner of the wheels. Again, if buyer chooses so I can take it to have it repaired but unfortunately at buyers expense which would be about 40 - 50$ bucks. And lastly, I did not like CCW hardware, so I put on my gold painted work hardware, and the paint is slightly chipping off from installation of the hardware.
Other then that, the rims have been freshly polished, brand new paint job, and brand new seal on the wheels. Tires have 90%+ tread life (if not more), and they are balanced. If any buyers have any issues with the wheels, don't use it as a lowballing point because it won't work but I will be willing to work something out.
The specs, while I have not accurately whipped out my ruler and measured just yet they appear to be..
PCD: 5x114.3
18x9.5+22 (3.5" Lip with Low Disk Face) with 225/40/18 Nankang NSII
18x8.5+22 (2.5" Lip with Mid Disk Face) with 205/40/18 Nankang NSI
I'm asking 2500$ obo with tires, feel free to shoot reasonable offers. Serious buyers, feel free to stop by as I will offer to test fit the wheels and roll the fenders for free if neccessary. NO TRADES, I HAVE A LOT OF RIMS I NEED TO SELL LOL
Warning to any lowballers: I am not in a rush to sell, and sorry but I don't want to come off as a penny pincher! But if you come meet me in person with the intentions to lowball me like crazy please save both of us the time. Feel free to send any REAL offers, and we can work from there. The worst I can say is no :)
Here are pictures of me assembling them,
http://i419.photobucket.com/albums/pp272/choleaoum/F04F9591-1A2A-494E-B2CF-A53DD8CCA8A6-27109-000008B382A885AB.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/D95CBF76-7143-4DCE-B752-879BEA6EAC3F-27109-000008B39E6BDC5D.jpg
Sorry, doing a custom widebody on my fender so no fender shots.
http://farm9.staticflickr.com/8493/8363467014_0c4a415e8f_c.jpg
http://farm9.staticflickr.com/8474/8362064103_31a4b299b8_c.jpg
http://farm9.staticflickr.com/8074/8363118140_8a74998f78_c.jpg