fuel rail alignment problem

[HipHopHippo]

http://zilvia.net/f/tech-talk/498604-fuel-rail-alignment-problem.html#post5092805

[HipHopHippo]

it is an isis manifold

[Biggamehit]

OOOOoo

mine bolted up
but for some them you have to drill a certain section of it. I only used the outside two tabs on my fuel rail.. I cut the middle one off when I ran the isis manifold. Hit up Ken at Enjuku. he can tell ya unless you can find it on google or someone else drops in.

[Mikester]

Line up the injectors with the ports... One of the tabs where the bolt goes in will be slightly "off;" the other should line up perfectly. Grind the hole out a bit until the bolt goes thru it and secure the rail- Done. Make certain that you have the little insulator/spacer bushings between the tabs on the rail and the bolt holes.

I had the same issue with my rail & FReddy mani and it came out great... If you look closely, you will see where I had to make the hole bigger on the forward tab... Dremel is your friend:

http://farm9.staticflickr.com/8478/8227913883_82f0309473_b_d.jpg