Desmond Regamasters Marquis Promadas 17x9" +18 +38 5x114.3

[Farkel]

These wheels just arrived off the boat from Japan. Regamasters are self-explanatory... discontinued, light-weight forged wheels made in Russia. I personally rank Regamasters at the top of my short-list of wheels I'd want.

Sizes are 17x9 all around, front pairs are +38 and rear pairs are +18 offsets. 5x114.

Gold pair, +38s:

http://i.minus.com/ibwGnCVSaph6Xx.jpg

http://i.minus.com/imGUfknaOhy7n.jpg

http://i.minus.com/ibqmAdrcFsQ4dJ.jpg

http://i.minus.com/iblAFD3Xv5xZZy.jpg


White pair, +18s:

http://i.minus.com/iTmjHebjgtGSn.jpg

http://i.minus.com/ifzw39QmnvYsZ.jpg

http://i.minus.com/ipV4fbypCwH9l.jpg

I was specifically looking for these sizings because my intentions were to use them on my personal FD.

They have the usual paint chips and some light curbing, but they're straight and can easily be refinished. No bends or cracks, etc.

Price is $1900 for all 4, shipping not included. Pick up in Bay Area, CA.

No lowballers!!! I don't mind keeping these wheels as spares. Plus, they're pimping out my garage in the meantime so I'm not in a huge rush to sell.

[jdhariwal]

Always wondered what those would look like on an S14. Those look amazing.

A buddy of mine is actually looking for a set, so I'll let you know.

[Farkel]

These wheels would look great on any car. I prefer them meaty, but stretched looks good too. For the record, I was going to run 255/40 Star Specs (or similar) on these. With a fitment like this:

http://farm5.static.flickr.com/4122/4889142017_026f96eda9_b.jpg

[Kanho]

Didn't you sell your FD??
It is one of my favorite!

Good seller! Great wheels!!

[Farkel]

I did sell my previous FD (the one that's in my sig), but I have another one now :) You can read more about that one from my site (also in my sig).

Thanks for the bump!

[gbaby2089]

The single coolest wheels in existence.

GLWS OP.

[Farkel]

^ truth

I'm willing to split up the pairs if someone is interested in the +38's.

[seto519]

Clears Evo Brembo?

[Farkel]

I have no idea, but you're welcome to test fit it if you're local. The design of these wheels & spokes allows for a good amount of caliper clearance relative to its sizing and offset.

[CornSpeed]

Trade http://zilvia.net/f/wheels-tires/496244-fs-ft-18x8-5-9-5-10-carving-head-40s.html

[Farkel]

Sorry, I'm not interested in trades... unless it's for more Regamasters :)

[Farkel]

Bump! msglngth

[Farkel]

bump, who wants some regas

[Farkel]

ttt msglngth

[jdm2191]

sexy!

msglength

[Farkel]

Still available

[TheRealSy90]

That silver set is godly.

[FaLKoN240]

I sold all the Miata parts I acquired.

[Farkel]

That silver set is godly.

Lol :naughty:

I sold all the Miata parts I acquired.

To make room for these Regamasters, I assume?

[Farkel]

Bump bump bump

[Farkel]

Bump willing to trade for 18x10 and 18x9.5 AME FS-01's! I kind of miss these wheels

Also interested in 18" Volks... but that's about it

[Farkel]

Bump ! This would be a great meaty setup or whatever you want to do

[FaLKoN240]

There are some FS01s I know of... damn

[!Zar!]

I love ReggaeMonsters!

[Farkel]

Better than RotaMasters!

[Farkel]

17x9's on a FD:

http://shirtstuckedin.com/wp-content/uploads/2011/10/Japan1FD4.jpg

17x9's on a Widebody FD:

http://cdn.mkimg.carview.co.jp/minkara/parts/000/003/562/436/3562436/p1.jpg?ct=198cd498f170

[FaLKoN240]

Lemme know if you'll sell the +18s separately...

[Farkel]

I can do that, let me know

[eg_junior]

Pm me price for the +38s please.

thanks

[Farkel]

If buying in pairs, I'll split it right down the middle

[Farkel]

Price lowered... $1800!!!

[chiboy002]

if i were to buy these could you possibly hold them for a few months?
i plan on going to california around may, could pick them up then.

[Farkel]

That shouldn't be a problem, but I would like a deposit to hold it that long. Thanks

[chiboy002]

That shouldn't be a problem, but I would like a deposit to hold it that long. Thanks
it would mostly be paid in full

I'll get back to you on this cause I just ran into some money issues, however I'm pretty serious on my offer

[Farkel]

Ok let me know... in the meantime, bump!!

[iJDM]

RDM as fuck.

GLWS

[irritatedmax]

^lol

Love Rega's

[Farkel]

Who wants some legit wheels??

[Farkel]

Bump! Do I really have to post these on the Honda forums

[Farkel]

Bummmmmppppppp

[LBCtoofortee]

not trying to shit... but $400 a wheel for some curbed up not matching pairs? I think you're way off on the price.

[TriniTT]

not trying to shit... but $400 a wheel for some curbed up not matching pairs? I think you're way off on the price.

Don't preface taking a shit by stating you're not trying to. I'm curious why you would presume to be a Regamaster expert enough to knock the value of a priceless commodity to some, an item over a decade discontinued and coveted sizes for many various chassis. Refinishing is relatively inexpensive for a set of wheels you can't go out and buy on a whim.

[Farkel]

Don't preface taking a shit by stating you're not trying to. I'm curious why you would presume to be a Regamaster expert enough to knock the value of a priceless commodity to some, an item over a decade discontinued and coveted sizes for many various chassis. Refinishing is relatively inexpensive for a set of wheels you can't go out and buy on a whim.

Now hold on a second, he is quite clearly a Regamaster connoisseur :goyou:

Btw congrats on selling your set! Was it sold through here or somewhere else?

@LBCtoofortee, if you think I'm way off in price, what are you proposing? If you still think you can get Regamasters, especially in good sizing, in perfect condition... you are extremely misguided.

For the record, my other personal set of Regamasters was also refinished and had light curbing. This is something any wheel repair shop can do with ease, and the mismatched colors become a non-issue at this point.

[zneubauer]

bump for the Aussie and some badass wheels.

[jdizzy204]

Good dude and you can buy with confidence. GLWS!

[TurboFC3C]

not trying to shit... but $400 a wheel for some curbed up not matching pairs? I think you're way off on the price.

As someone who has been looking for that perfect set of Regamasters, I can tell you, they are rare to come by.

I eventually gave up on the idea after months of searching. I settled on my number two wheels, the much more common Volk Racing TE37's. Wheels that I would trade in an instant if I find the right set of Promadas.

I think the price reflects on these hard to find wheels. Forged, Russian, classic.

[TriniTT]

Btw congrats on selling your set! Was it sold through here or somewhere else?


Thanks! I sold the previous set semi-locally to a guy that I knew was searching for my exact set basically. It usually does not take long to sell them; a lot of people desire Regamasters, but like TurboFC3C said, when you're in the market for wheels and you can't find what you want, most people end up moving on to whatever is available. Selling Regamasters is a brief waiting game, then they go to someone who's happier than a kid getting cotton candy. When discussing an item that can't easily be attained in another scenario, the price point should be a no brainer.