milo2191
12-21-2012, 06:16 PM
600!!!
I have a sr 20 long block for sale.
It spun a rod two weeks ago. I replaced the bearings and put a new crank in but it must have a bad rod. It still checked out with a plasti gauge. The car was never driven after replacing everything. Besides burping I hear a slight knock at 4k rpms. When I let off the throttle. Car has never left engine stands. i have serpveral people that will vouche on this oil does not smell like gas either. It could be the fact my engine mounts were not tight. But compression was 155,158,154,152. I am buying a new block on here. From popo so I will not need this one.
whats included,
block
head
stock head stud
newer water pump
new chain guide and chain
resealed everything
Cleaned up coolant lines and replaced them all
stock intake manifold included
no iacv
no turbo
no harness
no accessories
i can include coil packs and harness
modded oil pickup
U can hear the car start within this week due to it being pulled in a couple of days
Replace the rod which I have a good one and new bearing and you should be good I doubt the crank is hurt
700 pretty firm.
7707334526
http://i452.photobucket.com/albums/qq244/mike2191milo/20121210_100256.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20121207_094855-1.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20121208_200411-1.jpg
I have a sr 20 long block for sale.
It spun a rod two weeks ago. I replaced the bearings and put a new crank in but it must have a bad rod. It still checked out with a plasti gauge. The car was never driven after replacing everything. Besides burping I hear a slight knock at 4k rpms. When I let off the throttle. Car has never left engine stands. i have serpveral people that will vouche on this oil does not smell like gas either. It could be the fact my engine mounts were not tight. But compression was 155,158,154,152. I am buying a new block on here. From popo so I will not need this one.
whats included,
block
head
stock head stud
newer water pump
new chain guide and chain
resealed everything
Cleaned up coolant lines and replaced them all
stock intake manifold included
no iacv
no turbo
no harness
no accessories
i can include coil packs and harness
modded oil pickup
U can hear the car start within this week due to it being pulled in a couple of days
Replace the rod which I have a good one and new bearing and you should be good I doubt the crank is hurt
700 pretty firm.
7707334526
http://i452.photobucket.com/albums/qq244/mike2191milo/20121210_100256.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20121207_094855-1.jpg
http://i452.photobucket.com/albums/qq244/mike2191milo/20121208_200411-1.jpg