S15 in Ireland. Volk GTC, 1JZ, Spec R Aero etc.

[Chopaholic]

I will start with my old S13 which my friend has now bought.

http://sphotos-f.ak.fbcdn.net/hphotos-ak-ash4/421670_10151379972140374_1526139778_n.jpg

So here is the new S15, just going to copy and paste posts from other forums!

After months of looking at S15's and trying to convince myself I didnt need one, I just had to get one... So spotted this for sale down south, left for Tralee at 9am yesterday morning and never managed to get home until 3am.

The car is an S15 Silvia Spec S.

Quite pleased with the car for the money, it needs a small tidy up and a good wash, excuse the stupid inovite wheels and lexus lights, they will be the first items removed. :L

Here is some pictures taken this morning, no time to wash it or anything.

http://img.photobucket.com/albums/v329/chopi04/90b9fbb1.jpg
http://img.photobucket.com/albums/v329/chopi04/bd0318a8.jpg
http://img.photobucket.com/albums/v329/chopi04/1363039a.jpg

and I guess I should show what I bought earlier on in the week for it also, a Toyota 1JZ conversion with front sump. :up:

http://img.photobucket.com/albums/v329/chopi04/b941647e.jpg

First step is to get a manual gearbox for the 1JZ and get the car cleaned up a bit.

Now, time to try and do some sleeping in work.
_________________

Bought a new bumper for it today on eBay as the old one had a few cracks and marks on it, got lucky and managed to get a pearl white one for decent money.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/p480x480/578245_10151699657875374_524235373_24197751_113105 9026_n.jpg

Integra Lip is finally on its was from England, should be here in a day or two.

Started giving the headlights a clean up today as they have the old nasty yellow frosted look to them, done one side to see how it would turn out, will do the other side through the week.

http://img.photobucket.com/albums/v329/chopi04/S15Lights-1.jpg

More to come very soon.
__________

http://img.photobucket.com/albums/v329/chopi04/aec816ca.jpg

Rear looking a bit more healthy now, and my new front bumper arrived, just need to clean the tape etc off it before fitting.

http://img.photobucket.com/albums/v329/chopi04/df584822.jpg

Starting to sell parts from my S13 now so will hopefully have the cash gathered for the Manual swap soon.
__________

Coilovers arrived today thanks to Warby!

http://img.photobucket.com/albums/v329/chopi04/8075c4f9.jpg

Took the ugly Nissan and Silvia badges off.

http://img.photobucket.com/albums/v329/chopi04/a4fa6c46.jpg

and the car getting ready for a good buff.

http://img.photobucket.com/albums/v329/chopi04/3edc7fdb.jpg

Also, got this delivered on Friday... :D

http://img.photobucket.com/albums/v329/chopi04/af747929.jpg
http://img.photobucket.com/albums/v329/chopi04/c24a5d02.jpg

Have a supra on its way from England soon as a gearbox doner, should hopefully have it here before next week.
__________

This arrived the other day as a donor for the gearbox, managed to pick it up for £700 delivered to my door (From London) which was a bargain considering the price of these gearboxes now days.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/599820_10151811427510374_878463805_n.jpg

A day after arriving at my house it looked like this..

http://img.photobucket.com/albums/v329/chopi04/cd38288f.jpg

http://img.photobucket.com/albums/v329/chopi04/4b2d7038.jpg

Also earlier in the week I whipped out the SR20DE from the S15.

http://img.photobucket.com/albums/v329/chopi04/286570f5.jpg

http://img.photobucket.com/albums/v329/chopi04/b5a7bd1f.jpg

Nice R154 ready to clean up

http://img.photobucket.com/albums/v329/chopi04/50d8360c.jpg

Ordered my Mounts and gearbox bellhousing yesterday so should hopefully have them here in a week, more updates to come then!
___________


Mount kit and Bellhousing for the 1JZ>R154.

And.. Getting this tomorrow all being well..

Exedy hyper single clutch and flywheel

http://img.photobucket.com/albums/v329/chopi04/DSC_1023.jpg

Pretty much good for a test fit in the coming week, then a bit of paint for the engine bay.
_________

A few updates, things have been slow for a little while, will hopefully be picking up the pace from here.

New front mount arrived.
http://img.photobucket.com/albums/v329/chopi04/IMG_1309.jpg

Bought some new wheels, SSR Professor SP1 - 17x10 ET16 and 17x9 ET16, very good condition however I will be getting them stripped and polished instead of black.

Finally got my oil returns sorted, cut, moved and tig welded. Fits like a glove now :)

http://img.photobucket.com/albums/v329/chopi04/IMG_1337.jpg
http://img.photobucket.com/albums/v329/chopi04/IMG_1338.jpg

Next on the list is sorting out the engine bay, needs a few small patches welded in and it will be getting a nice fresh coat of paint, its then time to put the engine in :)

More soon.

[Chopaholic]

After a long time without an update I have the car back running thanks to Richard bradley for the hard work, everything is pretty much good to go, only have a slight clutch issue which I can hopefully get sorted soon.

http://sphotos-d.ak.fbcdn.net/hphotos-ak-snc7/320682_10152318567575374_508016567_n.jpg
http://sphotos-h.ak.fbcdn.net/hphotos-ak-snc6/198108_554480377900182_1686541969_n.jpg

And a small video of it running.

S15 1JZ - YouTube (http://www.youtube.com/watch?v=G7ruqm_kSXE)

A few minor issues to sort out before I can drive it right, the clutch master cylinder needs modified and the exhaust needs to be slightly higher.

Huge thanks to Richard Bradley for the top quality work getting all the bits and pieces I couldnt do done for the car.

More to come soon.

[Chopaholic]

Small update, have the car pretty much back together, managed to destroy my instrument panel in the midst of putting my dash in (Shorted it out or some shit)

Had some problems with the clutch which have now been sorted, removed the pin from the vectra master cylinder, shortened it and threaded it to allow some adjustment, also replaced the ****ed up old slave cylinder pin with something a bit longer.

Old left new right.

http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/3489_10152330538750374_871098863_n.jpg

Raised the FMIC up some, cut the oem bumper to allow it in and looking fairly stockish.

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash4/481793_10152346323525374_2009852525_n.jpg
http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/531803_10152337664435374_703716417_n.jpg

Sold the SSR's in favor of some 18's, 18x10ET-2 and 18x9ET0 Volk GTC Face 2's, Just need smaller tyres, a little camber and repainted in silver.

http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/524932_10152366587940374_1157202665_n.jpg
http://sphotos-d.ak.fbcdn.net/hphotos-ak-ash3/547544_10152366588995374_1253365748_n.jpg

Still ironing out problems with the 1JZ, think I need a new rocker cover gasket, idle control valve and a little luck lol

More to come soon.

[Bushido]

cool car!

are you planning on painting the exterior blue too?

[Chopaholic]

cool car!

are you planning on painting the exterior blue too?

Cheers man, eventually the full car will be hypnotic teal mica, when the summer comes most likely.

[Mofuhcka]

Great looking build so far, dont give up lol

[tricky_ab]

I had seen this on FB a little while ago, and I legitimately got excited to see more...

Final Boss is doing some big things...

[future]

Poor engine bay

[STL240SXDRIFT]

GT-Cs are killer! Silver will look much better than the baby blue. Great build! Keep it going!

[AWahl]

Did your garage get vandalized? lol but the car is coming along good it sounds amazing!

[Bushido]

lemme get a final boss sticker!!

[Chopaholic]

Did your garage get vandalized? lol but the car is coming along good it sounds amazing!

I have idiotic friends who waste my paint lol

Thanks guys.

[RastaS14]

Very nice progress man! What are the overall goals? Just a fun street car?

[Chopaholic]

Very nice progress man! What are the overall goals? Just a fun street car?

Thanks guys, yea pretty much a fun street car which will be tracked when I can afford it.

Right I suppose I better throw some form of an update up, I havent touched the car in recent weeks/months, this has mainly been due to generally being a lazy bastard and working on friends cars lol

I was made redundant from work on Monday so have plenty of time to do the niggly jobs on the cars which I never got at before, I started my quest today and gave the garage a good cleaning to get the S15 back in with a bit of working area for a change.

I started with this, a bit of a crazy mess and yes, the graffiti is there to offend everyone possible.

http://sphotos-d.ak.fbcdn.net/hphotos-ak-prn1/31920_10152569931455374_449107110_n.jpg

After 4/5 hours of tidying/sorting I had this.

http://sphotos-a.ak.fbcdn.net/hphotos-ak-prn1/71406_10152569930115374_1664716299_n.jpg

http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash3/539854_10152569929395374_1285178329_n.jpg

Still have to remove the 7MGTE Engine tomorrow when I get my Engine Crane back. A new lick of paint to cover the walls too.

Anyway, enough of the Garage for now, I test fitted the Volks on the car, as you can see they poke a little, need to get less tyre, some camber and a roll to make them fit a bit better. Car is stinking from laying in a dusty garage for months.

http://i.imgur.com/cTZxJh9.jpg

http://i.imgur.com/Hdo0jwB.jpg

Still having 1JZ idling issues, have a new set of plugs to fit tomorrow, plus a few other bits and pieces which will be included in the next update.

More to come.

[Extreme Dimensions]

a lil :mepoke: love the build so far!

[Chopaholic]

Copy and pasted most of this from other forums so it may not make too much sense!

Made up my own downpipe/exhaust system, welds are a bit rough and ready but seem to hold just fine.

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/p206x206/5922_10152924975180374_412697506_n.jpg

Straight through, no back box, no silencers.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/q82/s720x720/935018_10152959288070374_1365875681_n.jpg

Had to modify the Vband connection on the turbo to fit right, the jack bar came in handy for a nice round end.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/222398_10152936528895374_661802567_n.jpg

My interior stuff finally arrived, Kevlar backed Brides etc.

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/1003651_10152972340915374_1028385403_n.jpg

Got the insides of the bonnet, boot and boot floor painted. (Door shuts etc still to be done) The colour is EXTREMELY hard to photograph to make it look right, its actually properly Teal.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/1003085_10153020188385374_1669773068_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/1006207_10153021172075374_1704315628_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/943555_10153030899330374_261740793_n.jpg

and last but not least I eventually started it with the new top mount setup, new IACV too which means it finally revs correctly.

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/q81/s720x720/156124_10153033689740374_827302992_n.jpg

Have to tidy up a few silly things and fix a couple of silly oil leaks, needs a pulley on the front as it creaks a little, but other than that she is ready to get mapped.

More updates soon.

Some new discs:
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/q83/s720x720/1004521_10153162974090374_1760360960_n.jpg
Bit the bullet and painted the GTC's at long last, look 10x better now :)
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/q79/s720x720/1146665_10153174837380374_1537335488_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/1157481_10153166683375374_1617787728_n.jpg

Managed to get a few new parts too, have a KAAZ 2-way diff waiting to go in and a new 17" slim line fan.

I have been so busy in work - However busy in work only means one thing and that is more ££.

After much thinking about buying an S14 winter slider I just decided to throw some more money at the S15 instead to try and get it finished.

Started by rolling the arches out like mad to try and make the wheels fit with at least camber as possible, wrecked the arch, got the grinder out and decided I would just over fender the car.

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/q86/s720x720/1379353_10153354335455374_548782594_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/q88/s720x720/226633_10153354590145374_431083389_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/q83/s720x720/1378490_10153354697675374_1027570095_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/q75/s720x720/1480535_10153530904815374_30082482_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/q86/s720x720/1424262_10153530900455374_2127006792_n.jpg

Bought a set of rear fenders which don't fit as well as I would like, I can't be arsed spending the time fixing them so have now pretty much got an order sorted for a full set of Origin fenders, plus roof spoiler.

Threw a few panels together to make it resemble a car and give me some inspiration, Camber is currently fully negative with the adjuster bolt out.

https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1472785_10153538883120374_1178967842_n.jpg
https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc3/q80/s720x720/1451485_10153538895125374_1238613021_n.jpg

Bought Skyline Brakes, Solid Bushes and some Kandy Purple paint for the subframe and calipers.

Once all the new parts start arriving the car will be heading down to get painted, hopefully have it almost completed early next year.

Got a little busy with the subframe over the past few days, stripped it down, spent a life time taking the stupid original bushes and sleeves out, cleaned it all up, gave it a lick of paint then added the new arms, solid bushes and my 2way diff. Also painted my new R33 Skyline brakes.

Out with the old.
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/q86/s720x720/1454734_10153566962960374_1265300542_n.jpg
Alot of banging to get this out.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/q79/s720x720/1497814_10153624030530374_438445672_n.jpg
Me being a cock for snapchat.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1469754_10153624030075374_2027161807_n.jpg
All painted.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/q79/s720x720/1476600_10153622496655374_903184291_n.jpg
https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash4/q84/s720x720/1513320_10153622497210374_1106954849_n.jpg
New arms arrived.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/q88/s720x720/1499645_10153638938555374_1278334134_n.jpg
With the rest of the stuff painted and all together.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/q84/s720x720/1520752_10153650704255374_1505173235_n.jpg

Just need to put my ARB in, tighten everything up and buy a new handbrake setup with some new discs.

Alan from Driftwizards also posted my parts out to me last week, origin overfenders all around, origin roof spoiler and a new front lip.

https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/t1/q71/s720x720/1491594_10153624030160374_1244099143_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn2/q80/s720x720/1472048_10153624030265374_2076362100_n.jpg

Christmas presents to myself arrived today :)

Rear fenders are here too but nothing to set them on with lol genuine aero is 10000x better than the cheap stuff you get here. HUGE thanks to Alan Mc Crory for getting these sorted for me. First class service from Driftwizards.

Only the front lip to come now to finish the exterior.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q81/s720x720/1525053_10153653050080374_266984486_n.jpg
https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/q73/s720x720/541384_10153653050445374_1296161003_n.jpg
https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/q82/s720x720/1455854_10153653050690374_281417275_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q86/s720x720/1503853_10153653050995374_124459794_n.jpg

As soon as I get the subframe back into the car I will post a picture with it all together at a respectable ride height.

So today I put the subframe back into the car and made it roll again - Awaiting my new Skyline discs/handbrake setup/lines arriving to finish this off.

Added some more strength to the inner of the wings.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/q87/s720x720/1514548_10153672628545374_1771020702_n.jpg

Done some undersealing.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/q84/s720x720/1535650_10153672627060374_2004134032_n.jpg

And my new 3 piece lip arrived.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-prn1/q84/s720x720/1488159_10153678515400374_1719017467_n.jpg

So then I decided to throw it all together and see what happens. Its duck taped together, its rough, its dirty, the photos are shit and its many different colours. However its starting to take shape into something cool.

http://i.imgur.com/VKY1f0O.jpg

My Skyline R33 Handbrake setup arrived along with my drilled and grooved discs all around, some nice new braided lines too.

My Skyline calipers painted.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc3/1514238_10153697877035374_1380637204_n.jpg

Braided lines.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-frc3/1499551_10153697879580374_447285717_n.jpg

Together.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/580572_10153697879155374_1723779874_n.jpg

Wheel on.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1604922_10153697878380374_432872306_n.jpg

Need to try and get myself some Skyline dust covers for the rear now to finish the brakes.

So for the first Saturday night in ages I managed to stay in the garage and work on the car.

Had to get the insides of the doors/shuts prepped and painted, also painted the rear panel so the overfenders could be fitted and it wont look as gash when I rip one off.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/1525473_10153747512430374_622628667_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/t1/1521755_10153747512255374_11367123_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-prn1/1557468_10153747512060374_183992024_n.jpg

Then some paint :P
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/1526148_10153747511890374_278906229_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/t1/1510568_10153747511755374_708725528_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1536718_10153747511535374_27944108_n.jpg

Came out quite good considering I was only painting at 1:30am.

Have built the doors back up since then, just need to put the windows back in.

It will be away very soon to have the full thing painted, just a few more things to do before that.

[Smurf_240SX]

Looking good

[collegekid]

I agree, this thing is sexxxxxyyyyy.

Where did you get that 3 piece lip? I'm jealous of your front origin fenders, as I have the previous generation ones that don't have the cutout for the sidemarker lights.

[tricky_ab]

Ah, it's been a while since I had seen this thing. It's good to hear (and see) that you're still plugging away at this ride.

[juvi22003]

Coming along nicely

[Kwolfe]

s15 + 1jz, match made in heaven!

[Chopaholic]

Booked in for paint next month so had to pull the finger out and start fitting some things properly, rear fenders on. Fairly impressed with the fit from the Origin fenders compared to cheap ones, minimal sanding needed and we were pretty much ready to rivet straight on.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-ash3/t1/1621998_10153854962250374_1922151690_n.jpg https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/t1/1011235_10153839929440374_138921402_n.jpg
Bought myself a little present too... Holset HY35 with a 10cm rear housing, very impressive figures on a 1JZ.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-frc1/t1/1625621_10153805963765374_1127033290_n.jpg https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/t1/1621750_10153805964335374_1182343035_n.jpg
Then got the internal wastegate welded shut.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/t1/1554524_10153811687030374_1311616259_n.jpg
And just a little blast from the past for shits and giggles.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t1/1524757_10153697882215374_41215986_n.jpg

Started fitting the front fenders this evening and should hopefully have them finished towards the end of the week.

[SrZenkeh]

That a custom mix for the colour?
Looks good

[Chopaholic]

That a custom mix for the colour?
Looks good

Yea man, its actually the colour some of our local busses are slightly darkened.

A small update this time, I had planned to get major progress over this weekend with the car but due to me being ill for the past week its been a no go so far.

An issue I needed to address before I went any further was the shifter for the R154, it falls to short of the Sbody tunnel, took the rear section of the box out and took it down to Alan Jones at Coleraine Radiator Centre who as usual left a fantastic job on it.

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/t1/1979738_10153916852930374_221174376_n.jpg

Before:
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/t1/1970741_10153916853835374_716177152_n.jpg

After:
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/t1/1901986_10153916852170374_1195841837_n.jpg

Once I am feeling a little bit better I have all the bits and pieces ready to go for my new exhaust/turbo setup too. It was meant to be away for paint already but I would like to clear up these minor things first.

[Theezy]

that paint tho! too sick!

[LaMaR-]

looking really good so far, really want to see it all one color and see the whole car in a single shot lol

[Chopaholic]

Just copy and pasting these from other forums but we have some progress!

Over the last while I have:
- Re-made the oil return (which is still fecking leaking)
- Rewired and extended the lambda sensor
- Changed the crappy accelerator cable to a nice fresh one from the Supra
- Played about with the FMIC and got it seating better with no rubbing
- Rewired and extended bits of the engine loom protecting them from heat
- Made a screamer pipe
- Finished the downpipe and added a new Lambda hole
- Heatwrapped bits and pieces
- Bought a new radiator as my old one was leaking, had it modified to the same spec and added a bung for a temp sensor
- Bought some expensive ass heat shield stuff

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10371410_10154228119355374_7379973308895929459_n.j pg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/1907682_10154228119750374_8646453564670129608_n.jp g
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/p417x417/10364080_10154228118785374_8161264056934466136_n.j pg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10378066_10154228072500374_4688829275445969955_n.j pg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t1.0-9/p417x417/1486797_10154228072380374_7238959053665826003_n.jp g

[Chopaholic]

Things are progressing, so much so the car is pretty much ready to rock and roll and ive started tidying up wiring and actually cleaning things.

First of all I was on a mission to sort out issues with the engine not running/revving correctly and running extremely rich, out with the carb cleaner and I discovered a massive leak in the inlet gasket, removed the inlet mani (which is a bastard in the tight engine bay) and replaced the gasket. Problem solved.

When I had it stripped down I removed the turbo and once again made a new turbo oil drain, decided to tig this one up for a bit of a better finish.
https://scontent-b-lhr.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1601167_10154574650620374_7489876432579415938_n.jp g?oh=5dd1439a08aecd7e708c652003dc4e47&oe=54701FA5

Started installing some of the clutter ive had laying in my bedroom for ages.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/t1.0-9/10553463_10154406707480374_7957150208210189690_n.j pg

Had the annual garage clear out...
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/l/t1.0-9/10620710_10154574650765374_6894693686654808188_n.j pg

Done some work in between to my IS200 Daily
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10660157_10154574650335374_6102925041782792135_n.j pg?oh=4a177bb930bf41f564502b8e1f07dafc&oe=54796444&__gda__=1417600594_e9f61a75c8adb1b221e4dd0a96e2e1f 9

Making use of the clean garage I painted my other wheels
https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn2/v/t1.0-9/10432947_10154546898785374_2247153994508222371_n.j pg?oh=c0a522a6213ab7432aabe711248bf6ae&oe=5478E283
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10570501_10154546897425374_1767327273725408810_n.j pg?oh=9d6bcea25f6a33de38f7c324f7462a48&oe=54670A8F&__gda__=1416881642_d931e760416742576f6573850527f90 c

Then some parts started arriving to get the final stages of the S15 complete, the boxes contain its brand new front lip, An6 piping and aeroquip fittings to make the power steering line (Turns out the PAS line at the moment is a piece of shit), new clamps for the FMIC piping and an AEM Uego Wideband.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10609730_10154574650230374_8841599593065969683_n.j pg?oh=8173cdcca0fd95ffc7568e4f3d0dff99&oe=54773556&__gda__=1416411443_caa1289e4ba859870c3d7c457427fa7 8

Installed the wideband and decided to re-wrap my downpipe after I welded in the new bung, A full roll of exhaust wrap on this.

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10583924_10154574650015374_8475880180477775549_n.j pg?oh=a8c434dae1e658ee8ef8b7b688c174ec&oe=54724C20&__gda__=1417648950_82e466aa629edebf5e9acc91d4f4622 c
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10610887_10154574650075374_8175032634047963054_n.j pg

Cut some exhaust gaskets down to make some funky Vband gaskets.
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10538633_10154574649740374_6513430109314563026_n.j pg?oh=0a9add4160e4bcd5c9cbb277b1713827&oe=546642FC

Had a hold back with a adapter for the steering rack.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/1480643_10154574649855374_1997039449138426127_n.jp g?oh=6e7609b709ea587987a049cccc4d7ae0&oe=54664BB0&__gda__=1415676041_a2a69cb9df571995f434c5d09e68755 8

Currently waiting on my Blitz electronic boost controller, a new adapter and a couple of minor things to come before I can actually drive the thing, should hopefully have them all this week!

[Chopaholic]

I had to get a new power steering like as one I made up was shit and left a nice mess on my garage floor, so after a quick hunt I found a local farm hydraulic suppliers who knocked me up a fantastic line for minimal moneys. Excuse how terrible the photo is of this!
http://i.imgur.com/a7I07QG.jpg

Oldskool Blitz E-SBC installed
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/1979618_10154597901715374_837345357554020920_n.jpg ?oh=2c483bb68fbc940a178940593d4d867a&oe=5489E327&__gda__=1417840973_5e01151c7c624f23ce98aac510ed728 f
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10593071_10154597902610374_1690376409566423454_n.j pg?oh=818d91e0f74c494bc8588810373dca50&oe=54A5B5E5

A boost gauge at long last, sort of running out of places to put gauges at this point!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10636135_10154597901925374_6257514015635761639_n.j pg?oh=2a198ce117c2d002fbdfb04a2520ebea&oe=5499A94F&__gda__=1419002457_b2ccc9fd012b288a82fec5d549cb6af 3

Got a little creative with a couple of lips from another car and made myself a much sleeker subtle lip for the bumper, need to flush the middle section out but this can be done when the lip is being painted!
https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10341744_10154597901510374_5757025673886831591_n.j pg?oh=5545248490e5636171d7aaf4bb4fe22f&oe=548C7462


And last but not least this happened, which has put an ear to ear grin on my face for the past two days.

A quick burnout, stopped as there was smoke coming from the engine bay which turned out to be my heatwrap bedding in!
https://www.youtube.com/watch?v=Vb4COg7ljD0

Up and down the road in first gear only, metal to metal noise made me stop, turns out my 2 way needs to have a little more backlash!
https://www.youtube.com/watch?v=aNzMRGio-00

Both videos are the car running with the boost controller turned down as far as possible - its an animal even still!

Next up is tearing out the diff and re-doing the side shims, finding some handbrake anchors, giving it a once over.

[Heywood Jablomie]

Had a hold back with a adapter for the steering rack.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/1480643_10154574649855374_1997039449138426127_n.jp g?oh=6e7609b709ea587987a049cccc4d7ae0&oe=54664BB0&__gda__=1415676041_a2a69cb9df571995f434c5d09e68755 8


This EXACT shit happened to me yesterday:bash:

Build is amazing though, your interior is tits.

[nomiezvr4]

great build you have going on here....I'd kill for a set of GT-C's for my ride..