HKS evc-s Installation help

[sr240_97]

Car: 97 240sx SR20DET
Need installed: HKS EVC-S

Hello everyone, I am a noob……. I got this hks evc and I’m trying to install it; half the work is already done but still the other half is yet to be completed. Not sure what goes into what and how to get power to the unit. Ill show the pics of what I got, tell me what you think.
BTW I’ve looked everywhere for the manuals and for instructions on how to install it on a 240 but no luck the closer I got was an installation on a RX7 but did not understand much.
Please help……:mepoke:

[EDacIouSX]

can you be a little more specific... what part are you having trouble installing? power you can probably wire it to ignition on or something like that,...

[sr240_97]

can you be a little more specific... what part are you having trouble installing? power you can probably wire it to ignition on or something like that,...

My apology on not being specific enough, its hard to explain what needs to be down or how i need it done when I dont understand enough to explain. Posted some Pics maybe they would help clarify what im having trouble explaining....

[blksylv]

It's easy to install. I had one on my redtop. If you were closer I'd offer to help install.

[sr240_97]

It's easy to install. I had one on my redtop. If you were closer I'd offer to help install.

Please share your knowledge.....

[blksylv]

Boost sensor needs to be tee'd off of the fpr vacuum hose so you might wanna move it from beside the ps reservoir so the line can be as short as possible. The line to the wg actuator is gonna go to one of the nipples on the solenoid and then you're gonna connect a vac line from the solenoid to the actuator. I can't look at the manual because I'm on my phone but you shouls be able to dl it from the hks site if one didn't come with yours.

[Yellow4g63]

HKS EVC-S Install (Pictures and Basic Walk Through) - RX7Club.com (http://www.rx7club.com/2nd-generation-specific-1986-1992-17/hks-evc-s-install-pictures-basic-walk-through-897378/)

that might help you. Looks pretty simple to me. everything plugs into the hks control box and the box needs switched power and ground.

[EDacIouSX]

pressure sensor is in pic 2 and 3.

[sr240_97]

Boost sensor needs to be tee'd off of the fpr vacuum hose so you might wanna move it from beside the ps reservoir so the line can be as short as possible. The line to the wg actuator is gonna go to one of the nipples on the solenoid and then you're gonna connect a vac line from the solenoid to the actuator. I can't look at the manual because I'm on my phone but you shouls be able to dl it from the hks site if one didn't come with yours.

Bump..lol y'all make it sound so easy. Ima work on it this weekend and use the info I get from here to help me out. Thanks.

[sr240_97]

No manual @ the HKS site..

[blksylv]

HKS EVC-S (http://www.hks-power.co.jp/en/products/electronics/boost/evcs/index.html)

there you are, thats about all thats in my manual and your setup will be the actuator style