RB25DET engine 3076 partout

[aaronlosey]

Most of this stuff is out of my old R33 Skyline. If you have any questions, please message me.

RB25DET out of a 1996 R33. Long Block. Comes with accessories, coil packs, belt, and little stuff like that. Does not come with the intake manifold or injectors. 900 - REDUCED TO 800

http://fabricatedmotorsports.com/crap/RB25partout/IMG_0158.jpg

RB25DET tranny that goes with that motor. SOLD

Real Greddy Intake manifold. It is in fantastic shape. 900 - REDUCED TO 750

http://fabricatedmotorsports.com/crap/RB25partout/IMG_0159.jpg

Power FC and hand commander for a maf sensor setup. 900. - REDUCED TO 800

Rb wiring harness to go with it all. 200 - REDUCED TO 150

Nismo coppermix clutch setup with flywheel to go with it all. It measured out to 8.52mm for the clutch disk, and I included a pic of the measurement. 600 - REDUCED TO 500

http://fabricatedmotorsports.com/crap/RB25partout/IMG_0165.jpg
http://fabricatedmotorsports.com/crap/RB25partout/IMG_0164.jpg
http://fabricatedmotorsports.com/crap/RB25partout/IMG_0163.jpg
http://fabricatedmotorsports.com/crap/RB25partout/IMG_0212.jpg

Garrett 3076 with T3 flange and 4 bolt discharge, external gate setup - 1000 - REDUCED TO 900. I have both hot sides, the .6 adn the .8, it can come with either. The .8 is brand new and never been mounted. Turbo is in great shape, only run for a couple hours probably.

http://fabricatedmotorsports.com/crap/RB25partout/IMG_0166.jpg
http://fabricatedmotorsports.com/crap/RB25partout/IMG_0167.jpg
http://fabricatedmotorsports.com/crap/RB25partout/IMG_0168.jpg

Turbine housing for the 3076 which is T3 undivided with 3 inch 4 bolt external gate setup. 300. - REDUCED TO 200

http://fabricatedmotorsports.com/crap/RB25partout/IMG_0162.jpg

N62 Maf - 80 bucks - REDUCED TO 65

Q45 Throttle body 80. - REDUCED TO 70

Turbo manifold from 6boost. external gate, never used, very nice. SOLD

[va240dude]

Interested in the powerfc, pm me with pics, miles used etc thanks!

[mkhoid]

willing to part out the stock shifter ?

[aaronlosey]

Interested in the powerfc, pm me with pics, miles used etc thanks!

I don't have pics of the power FC at the moment, I will get pics shortly. The power FC is in fine shape, and has stupid low miles because it was purchased for a non street legal r33. I got the power FC new. Pics will look just like any other power FC : )

[aaronlosey]

willing to part out the stock shifter ?

Transmission doesn't come with the shifter. Just have the transmission.

[kouki-gymkhana]

Pics of the Greddy manifold and 6boost? Very interested!

[Gamma]

Most of this stuff is out of my old R33 Skyline. If you have any questions, please message me.

RB25DET out of a 1996 R33. Long Block only. 900

RB25DET tranny that goes with that motor. 900

Real Greddy Intake manifold. 900

Power FC and hand commander for a maf sensor setup. 900.

Rb wiring harness to go with it all. 200

Nismo coppermix clutch setup with flywheel to go with it all. 600

Garrett 3076 with T3 flange and 4 bolt discharge, external gate setup - 1000. I have both hot sides, the .6 adn the .8, it can come with either. The .8 is brand new and never been mounted. Turbo is in great shape, only run for a couple hours probably.

Turbine housing for the 3076 which is T3 undivided with 3 inch 4 bolt external gate setup. 300.

N62 Maf - 80 bucks

Q45 Throttle body 80.

Turbo manifold from 6boost. external gate, never used, very nice. 900



I will put up pictures and more info later tonight. : )

Is it a series 1 or 2 rb


Posted from Zilvia.net App for Android

[aaronlosey]

Pics of the Greddy manifold and 6boost? Very interested!

Send me your email address and I can get them to you faster as I am on a cell phone.



And as for series 1 or 2, I don't know. Whatever comes out of a 1996 r33 gtst from the factory!

[JBotch79]

SERIES 2. free bump

[Gamma]

Thx JBotch, its an uncut harness right and complete

[JBotch79]

no problem

[Sliderintrainin]

how many miles on rb25? compression test numbers? any acessories included?

[aaronlosey]

Not sure how many miles, it was something like 40k kilometers on my skyline.

I haven't compression checked it, but if you are in the area you are welcome to come look at it.

I don't believe the wiring harness is cut, i will go get pics of it.

Accessories are on the motor with the belts still on. No ac.

[kouki-gymkhana]

Sent you a PM with my e-mail address. Waiting for pics...

[aaronlosey]

I didn't get your pm for some reason, can you resend it, or just text me for pics at 2102694071.

[aaronlosey]

Tranny and exhaust manifold are gone!

[WhipsGoneWild.net]

def want pics on 6boost mani

edit: im a tard for not reading above post..

[kouki-gymkhana]

Cot dammit! I was waiting so patiently for those 6boost manifold pics and someone snagged it out from under me! So frustrating! Free bump for the OP then...

[HotcEOD]

I looked at all of these items in person today, and can say that they are all in very good condition (you really should put up some pics). Sorry if I beat you to the 6boost manifold and transmission, but I couldn't pass them up!
Thanks again Aaron!

-Bryan

[aaronlosey]

I have a set of like new tomei injectors that I think are 7xx something size, or something like that. I will post pics and maybe someone can identify them. I have 2 nismo 550s left over from the motor too, those are still in the box new. I am back in town and I will post pics, sorry!!!!

[WhipsGoneWild.net]

I looked at all of these items in person today, and can say that they are all in very good condition (you really should put up some pics). Sorry if I beat you to the 6boost manifold and transmission, but I couldn't pass them up!
Thanks again Aaron!

-Bryan

Willing to part with the 6boost?? You aren't going to use it (;

[smmsak]

I need a idle air control valve let me know if ya got one. Thanks

[aaronlosey]

I finally added giant pictures for everyone off my cellphone.

[Spencer dougherty]

sent u a pm on the power fc and q45 tb.. got cash in hand

[aaronlosey]

Sent you a response!

[aaronlosey]

I had some people ask to buy the coil packs, 100 dollars for all six, they are Oem Nissan.

[aaronlosey]

I lowered the price to move this stuff faster : )

[Hatemy7]

Bump for a real legit baller aka dude!

I will start my rb25 swap next month so i am sure i will need some parts lol haha. But i will let you know when i do sir..

[Mitsubayati]

How much for the 7xx injectors shipped to 94579?

[aaronlosey]

The Power FC is now sold : )

[goldendrift]

ill take coil packs for 100

[Gamma]

interested in Engine harness if u still have PM'd u

[aaronlosey]

Pms returned!

[budderigs]

Are you willing to ship the rb25?

[aaronlosey]

I can ship the rb if you pay the shipping.

[aaronlosey]

MOTOR, TRANNY, POWER FC, INJECTORS, are gone : )

[[email protected]]

Do you have better pics of the IM? No Greddy emblem?

[aaronlosey]

Manifolds are gone, throttle body gone, knuckles gone

[slideslidegnarslide]

Do you have the dust shield In between the engine and trans? And also do you have an r33 trans member?

[d_nice]

good parts here man