View Full Version : VK56DE Swap Help
yeknom919
11-26-2012, 04:18 AM
so ive done easy swaps before, usually with honda motors(b18, k20 swaps), but ive never done anything to this scale and i lack the knowledge:(
if anyone can give me the information on how i'd go about putting a VK56DE(nissan titan 5.6L) into my 1994 240sx, id REALLY appreciate it!
somethin like this(except 240 version of course)
:bowrofl:Ryan Kado VK56DE Powered 350Z Dyno #1 - YouTube (http://www.youtube.com/watch?v=0eKUQre02Q8)
onehundredoctane
11-26-2012, 05:54 AM
Be the first to do a wiring write up! Get both wiring diagrams and figure it out!
shift_down
11-26-2012, 07:03 AM
oh god, this is going to be sick. DOCUMENT EVERYTHING and report it here. Cant wait to see this.
yeknom919
11-26-2012, 07:35 AM
yeahthe wirings gonna be a pain in the ass for sure -__-
ha i know!! it'll definitely be a monster!
i just gotta figure out exactly what i need to get to make this priject do-able
Memberofthe600hpkaclub
11-26-2012, 08:51 AM
Be ready to drop big $$ it will not be cheap
dbenavides
11-26-2012, 09:18 AM
go on V8nissans.com and they should be able to help you out. I just finished my VH45DE swap with their help. Their is a few guys on there that are or have done VK56DE swaps.
yeknom919
11-26-2012, 11:28 AM
thanks for the information. yeah that website seems to have alot of information. well, it may cost alot, but it will be well worth it i think. huge amounts of power in a fairly light-wieght car!
yeknom919
11-26-2012, 01:12 PM
so ive got my shell, and the VK56DE. after searching and searching for mounts built especially for this swap but could find none, i might have to custom make my own which will take alot of time:( im still on the lookout for a 6 speed tranny that'll work. now i just gotta get a starter, alternator, and ecu. it also looks like im going to need to find, or modify, my oil can. its to big for the engine bay! definitely alot of work but i planned on it anyway.
onehundredoctane
11-26-2012, 02:14 PM
yeknom919, if you can get ahold of the VK56 engine I can try to help. I've done plenty of SR, RB and honda wiring, and have an S13 wiring diagram here if you want me to go over it for ya.
dbenavides
11-26-2012, 02:39 PM
so ive got my shell, and the VK56DE. after searching and searching for mounts built especially for this swap but could find none, i might have to custom make my own which will take alot of time:( im still on the lookout for a 6 speed tranny that'll work. now i just gotta get a starter, alternator, and ecu. it also looks like im going to need to find, or modify, my oil can. its to big for the engine bay! definitely alot of work but i planned on it anyway.
You will need to use a 350Z transmission if you want a 6 speed. There is a guy on ebay that makes the transmission adapter plate. The plate works for both the Z32 trans and the Z33 trans. I wish I could help you with the motor mounts. I know excessive manufacturing & Mazworks makes them for the VH45 swap.
andrew600
11-26-2012, 03:11 PM
you need to immediatly start looking into NATS and aftermarket ecus for this.
when i did my swap i was able to keep the factory ecu. but wiring around nats is a pain in the ass, you do not have the connections needed to use nats properly and the motor will likely always stay in limp mode, or not start at all.
be weary as well, most all had chipped keys and the memory for the are stored in the bcm and not in the ecu. but if you go stand alone ecu a lot of this should be a non issue. but i kept all this shit and it was horrible.
shoot uprev an a phone call about what you have. when i did my swap they couldnt delete nats yet but im sure you can now.
yeknom919
11-26-2012, 08:30 PM
thanks everyone for the help. i'll definitely have to look into a 350z tranny. unfortunately that'll have to wait until i get the money haha. as for ecu problems, i plan on getting a stand-alone AEM system so i dont think i have to worry about that. it should be on my doorstep within the next week or so.
@onehundredoctane thanks for the assistance, yeah once ive got all the engine components i'll definitely talk to you about wiring everything together.
ahhh cant wait until this build is done. i'll definitely have the meanest machine that anyone in this city has EVER seen haha. gonna go through tires like crazy. sooo many rpm's ha
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.