SR Intake pipe

[shomo172]

I've been searching but haven't found anything useful or up to date.

So...

I'm really thinking I need to recirculate my BOV. It seems to be the root of many of my SR's problems.

Does anyone make a intake pipe with the bung to recirculate a BOV? I don't really have the time or resources to have one made and welded on.

Would it be a good idea to get a stock SR intake tube? I have a Greddy Type S and it I turn it around on the flange, it will be pointing at the turbo. I've never seen the stock intake pipe so I don't know if it would be easy to run a hose from my Greddy onto the bung.

Any info would be appreciated! Thanks!

[RocketOgre]

What are you using for an intake pipe right now? I have an Apexi super suction kit on mine, and it came with a port the same sizes as my RS's recirc kit, so I just got a tube from a hardware store and boom, no more dying at idle.

[shomo172]

What are you using for an intake pipe right now? I have an Apexi super suction kit on mine, and it came with a port the same sizes as my RS's recirc kit, so I just got a tube from a hardware store and boom, no more dying at idle.

Right now the previous owner put like a short piece of piping attached to a long rubber tube to the elbow piece bolted to the compressor housing. Kinda ghetto. Definitely not stock.

I saw the Apexi one but its a little pricey.

[RocketOgre]

Most of the metal intake tubes are. Depending on what turbo/MAF you are running you may not need a metal intake tube though. If it were me I'd try picking up a stock intake tube and using that.

[shomo172]

Anyone got a picture of a stock one installed so I can see where the bunge sits on the tube?

[om3ga]

Maybe post pics of what you are working with. I have this kit and it is LEGIT.

APEXi 538-N011 Super Intake Suction Kit S13 SR20DET for 80mm MAFS (http://www.frsport.com/index.php?target=products&mode=details&product_id=1313)

[dopplganger1]

You can add these to one of your couplers
http://www.siliconeintakes.com/product_info.php?cPath=12&products_id=500&osCsid=134c9d2074782e01d2bd131b38e72932 & Water to air fittings (http://www.siliconeintakes.com/product_info.php?cPath=12&products_id=179&osCsid=134c9d2074782e01d2bd131b38e72932)

[shomo172]

You can add these to one of your couplers
http://www.siliconeintakes.com/product_info.php?cPath=12&products_id=500&osCsid=134c9d2074782e01d2bd131b38e72932 & Water to air fittings (http://www.siliconeintakes.com/product_info.php?cPath=12&products_id=179&osCsid=134c9d2074782e01d2bd131b38e72932)

Hm seems like it could work since 50% of my intake is like one long coupler. Hopefully that fitting is close the the size of the opening on my BOV.

Thanks!

I'll upload a picture of my intake tomorrow possibly.

[shomo172]

Anyone know anything about this? Says you can add a BOV recirc bung for 15 dollars.

http://pipingpro.com/shop/sr20det-intake-pipe-intake-p-65.html

[dopplganger1]

Hm seems like it could work since 50% of my intake is like one long coupler. Hopefully that fitting is close the the size of the opening on my BOV.

Thanks!

I'll upload a picture of my intake tomorrow possibly.


they have different size fittings so they most likely have one for yours, and the pipeingpro one looks good and is actually a reasonable price

[shomo172]

they have different size fittings so they most likely have one for yours, and the pipeingpro one looks good and is actually a reasonable price

Yeah I might end up going with that. I guess it's custom made. You just email them about your car and it's specs.

[ultimateirving]

DUde go to a local welder. If they can weld aluminum it would be 20-30 bucks max to have it just fabbed in. You also need a BOV ready to recirc so you candrive it home.

[Tedskiii]

PBM makes one, not the cheapest, but looks good. I plan on ordering one soon anyways.

エンジンパーツ Engine Parts - POWERED BY MAX (http://www.gtfactory.jp/cms/page.php?13)

Let me know how the recirculation helps, I'm running atmospheric aswell. Hopefully after a good cleaning of my IACV, and recirculating my idle problems will lessen.

[ivankol]

let me google that for you .

1718 Southwest Biltmore Street
Port St. Lucie
(772) 343-0510
Jr Fabrication & Performance