Sr20det wont start and oil leak!

[Cubantunr]

Ok so I own a s13 redtop completely rebuilt, car ran ok before build besides a cracked block. Fixed that issue and now its all back together went to. Fire it up and it just cranks and cranks, I have fuel pressure and spark but doesn't seem like the pistons are wet. Why aren't the injectors firing.. messed with cas and nothing. Sure enough after a couple tries I get an oil leak... Coming from the timing chain cover. Doesn't seem to be the main seal maybe the gasket(used Right Stuff Grey)? Whats your opinions, thanks in advance.
http://i49.tinypic.com/wjj8mb.jpg
http://i45.tinypic.com/sxnpd4.jpg

[hardparkd]

is it me or does that look like ATF ... :/

[K3MPS]

^^^ It does, or maybe he used royal purple.. That silicone job is awful

[Cubantunr]

It's not atf its amsoil break in oil. And right stuff sealent pretty much best stuff u can get. But seems like I might have to redo the seal.:wiggle:

[Cubantunr]

Bump, anybody know? Went to crank again and now the fuel pressure shot up to 100psi but injectors not putting it to pistons!? And as for main seal just replace gasket??

[fliprayzin240sx]

I wouldnt be surprised if you put too much gasket and you clogged the oil passage.

[Cubantunr]

Well I'm about to remove it right now and redo it again with right stuff. Also i put the suggested grease to prime oil pump maybe I put too much? What about injectors tho.

[Sr20det power]

i guessing some how you fried your ecu, or your cas, that controls your injector pulse!