Isis intake manifold stock fuel rail HELP

[Shawn661]

I need help this screw is hitting the valve cover i needed to know what you would do in this situation and what that screw even does

[Shawn661]

Sorry this is the screw wrong picture

[ultimateirving]

Turn ur fpr over, lmao/ or go for an external one.

[jsu1012]

Man i ran into this exact issue. i had to flip it and bend the line a little on the fpr and run the fuel lines between the valve cover and fuel rail. just be careful and dont bend the fpr line too much where it kinks. when i get home i'll post a picture.

[Shawn661]

Man i ran into this exact issue. i had to flip it and bend the line a little on the fpr and run the fuel lines between the valve cover and fuel rail. just be careful and dont bend the fpr line too much where it kinks. when i get home i'll post a picture.

Alright thanks bro so much knowledge on zilvia

[Lil_D]

you need this to change where the fpr is facing Tomei 185106 Fuel Pressure Regulator Adapter Nissan Subaru Toyota (http://www.frsport.com/Tomei-185106-Fuel-Pressure-Regulator-Adapter-Nissan-Subaru-Toyota_p_16572.html)

[Shawn661]

I need to know what they are for and the bending worked perfect

[Lil_D]

you cap them off with the bolts that came with the intake

[ultimateirving]

I need to know what they are for and the bending worked perfect

those are vacuum ports, used to hook up things like a boost controller, boost gauge, or other vacuum requiring items...
If you plug them use thread locker or something to seal them off completely. as they can leak if improperly plugged

[jsu1012]

http://i1231.photobucket.com/albums/ee504/jsu1012/81F1BAE4-C198-4D3F-BDEA-BBA726D8B9EC-4326-000004F7D268BBFF.jpg

[Shawn661]

http://i1231.photobucket.com/albums/ee504/jsu1012/81F1BAE4-C198-4D3F-BDEA-BBA726D8B9EC-4326-000004F7D268BBFF.jpg

What about the bottom of your manifold can you send me a picture of that please?

[DRIFTERS14]

a little late but these work the best
Greddy Swivel Fuel Pressure Regulator Adapter : SR20DET (http://www.phase2motortrend.com/grswfuprread.html)

[jsu1012]

What about the bottom of your manifold can you send me a picture of that please?

yea , i'll shoot pics today after work.

[codyace]

Remember those 3 ports on the bottom are 1/8" NPT thread, and are poorly cast. I'd strong sugggest re tapping them before putting in any plug.

With that all considered (even as stated above) they make great ports to use for the FPR, Boost Controoler, BOV, etc etc.

[om3ga]

The Greddy Swivel adapters work best, i have 3 brand new ones sitting here. Maybe we could work something out.

[Shawn661]

The Greddy Swivel adapters work best, i have 3 brand new ones sitting here. Maybe we could work something out.

How much are you trying to sell them for

[om3ga]

Not too much. They are $80 on FRSport.

I could probably do $40-50 shipped.