PDA

View Full Version : No Overdrive!!!


bgodinez1988
10-15-2012, 07:55 PM
just replaced transmission and still not shifting into overdrive i have to really floor it to engage it will only engage around 75 mph and i replaced tps i unplugged rev sensor what else could it be??? need help

Frank_Jaeger
10-15-2012, 08:48 PM
Make sure your overdrive button is clicked.

EDIT: You UNPLUGGED the rev sensor? Why? Try replacing it, if it's not working.

http://forums.nicoclub.com/automatic-issue-no-overdrive-t496584.html

Or just get a 5-speed. Someone had to say it, sorry.

bgodinez1988
10-15-2012, 09:03 PM
the shifter is working O/D light comes on and off when i press the button

bgodinez1988
10-15-2012, 09:03 PM
honestly i wish i can afford it right now thou

Frank_Jaeger
10-15-2012, 09:09 PM
Yeah I know how that goes. I've got a 5-speed in the garage and I just need the master, slave, some lines, and a clutch pedal.

Have you tried replacing the rev sensor, though?

bgodinez1988
10-15-2012, 09:30 PM
well i cant find any rev sensors at dealers or any place and its really rare to find 240 at the local junk yard

Frank_Jaeger
10-15-2012, 09:36 PM
Bam!

SENSOR ASSY-REVOLUTION - 240SX (S13) 1989-1994 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com (http://www.courtesyparts.com/31935-sensor-assy-revolution-240sx-s13-1989-1994-p-68574.html)

Bend over, it's $133. I'm assuming you have an S13, although I don't see why it'd matter between S13s and S14s.

To replace it:

So that means your revolution sensor is F'd. And replacing it is kinda annoying. You have to undo the carrier bearing on the drive shaft, undo the trans mount and replace the sensor on the driver's side on the top of the trans.

bgodinez1988
10-15-2012, 09:39 PM
FUckn Aye haha Thanks alot i just hope it works...

Frank_Jaeger
10-15-2012, 09:49 PM
I think it should. Good luck, man!

bgodinez1988
11-16-2012, 06:28 PM
well i replaced the revolution sensor and still no luck im thinking its the ecu now


Posted from Zilvia.net App for Android