View Full Version : rb25det neo in s14 wiring specialties harness no spark
imwigger0303
10-10-2012, 11:57 AM
im just put my rb25det neo into my s14 automatic and used a wiring specialties conversion harness engine cranks im getting fuel and air but no spark tryed known good coil packs and still nothing any help would be greatly appreciated : )
Memberofthe600hpkaclub
10-10-2012, 12:11 PM
Bad ecu?........
slobalt716
11-14-2012, 10:10 AM
Ecu tested good on another rb25 neo s14. Bump
fliprayzin240sx
11-14-2012, 04:13 PM
You hit up Yury yet? You checked the coilpack harnesses and make sure the grounds are good?
Johnphen
11-14-2012, 04:21 PM
s1? s2? how is your ignitor grounded?
fliprayzin240sx
11-14-2012, 04:26 PM
^^^He said Neo...
slobalt716
11-16-2012, 02:35 PM
Ill have him check the grounds in the coil pack harness. He had the complete harness from wiring specialties tested in another car and it fired right up. Along with the coils, cas and ecu.
slobalt716
12-02-2012, 08:45 AM
still nothing. bump
dftsilvia
12-22-2012, 05:49 PM
fyi his harness was never tested in another car. and neither was his cas
slobalt716
12-27-2012, 07:00 AM
fyi his harness was never tested in another car. and neither was his cas
he sent the ecu, coil packs, harness, and cas to wiring specialties and they tried it on a car there and they said it fired right up
SpoolNSlide
12-27-2012, 11:01 PM
wheres the ground on your ignitor the middle?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.