wtb intercooler piping please read deatils

[s13mikesr20]

Ok went from bottom mount INTAKE MANIFOLD TO....FREEDY STYLE MANIFOLD IT SITS MUCH HIGHER

http://i1161.photobucket.com/albums/q502/Canadasr20/IMAG0621_zps97c3eeb8.jpg

I need a cold pipe from Freddy manifold to interfoller its at usual location


http://i1161.photobucket.com/albums/q502/Canadasr20/IMAG0622_zps6bf350ef.jpg
As for turbo setup gt35r with the snout on top facing driver side just need a pipe that will get close enough to the point of were I can throw a 45* silicone hose on it or it comes pre bent with a 45* hose


Please pm me with a picture ornumber to send me pictures paypall ready and I got the moneys in the bank of national ballers

[s13silvia123]

i have the coldpipe for the intake manifold but it has a hole in it plus its a real greddy cold. or you can just go buy yourself an isis coldpipe around 40-50 bucks. you can also use the s13 hotpipe aftermarket one and modify it to fit as well

[s13mikesr20]

thank you so much

as for a bump update

got the cold pipe no im in need of a hot pipe its ether im gonna weld and fab or find something depends if i find a deal

[BiG MiKE86]

Ive got a real greddy hot pipe + tial 50mm bov lmk - I had a similar setup with a gt2871r and just added a 90deg elbow to work with the hotpipe I have

check my f/s thread

http://i41.photobucket.com/albums/e289/BiGgMiK3/IMG00334-20121003-1822.jpg

[s13mikesr20]

I have a bov don't need this sorry

Still looking

[cpl dozier]

Check my sale thread...Complete greddy sr piping and intercooler. Willing to part the bov from the piping and also the intercooler core. Let me know. Was on S14 with S14 SR and S15 bb turbo. Had clocking pipe on it.

[angledriven]

try cxracing i had the same issue on my build