Wiring Kouki headlights to zenki. Help!

[Dudegonefresh]

Ok so I have a 95 s14 and going Kouki front. My low beam harness has 3 holes and Kouki headlights have 2 wires. Would it work if I used hid so the te 2 wires off the Kouki headlight tithe ballast and those two wires into my zenki harness work? Will it? Or is their another way? I reas online people using relays and I don't know crap about wiring. Also read some guy got the headlight harness off a Kouki from Nissan to work. Tell me how you wires yours? I want my lights to work like factory when I flick that switch.

[F7Flare]

the best way to do it is to get a relay and wire that up, this way you get full functionality and have your low beams and when you turn on your high beams, the low beams remain on. or you can get a h1 plug for the kouki headlight and splice the zenki wire onto the plug, then plug and play. however with this 2nd method your low beams wont be on when the high beam are on. lastly is the cheapest way to do it and very easy. I just disassembled the zenki plug, (black plug). there are 3 wires, one is for the ground. and I cant remember which other wire to use, but basically you use the ground and one of the other wires and directly connect them them to the headlight plug. pm if this doesnt make sense. I can help

[DennisC]

What I did on mine was just use 2 of the 3 wires for my HID low beams. I crimped on female spade insulated connectors and connected them up to my HID ballast.