PDA

View Full Version : Would you guys do it? RB25DET running hot on cheap ebay fans.


welts12786
09-28-2012, 02:26 AM
Flex-a-lite 420 Lo-Profile S-Blade Electric Fan (http://www.google.com/products/catalog?cid=4730788955524385124#start=30)

Sileighty_85
09-28-2012, 05:48 AM
http://zilvia.net/f/builds-builds-only/332057-project-rb-how.html

The Dude
09-28-2012, 06:42 AM
Do you have a shroud? My RB was running hot until I got one.

welts12786
09-28-2012, 04:54 PM
I dont have a shroud. I live in Hawaii. Running 2 12 cheap ass ebay fans. I have seen other people run the same fans with no issues. What are your opinions. Should I buy a shroud for the cheap fans for 270 on the 420 FAL Fans directly wired up

welts12786
09-28-2012, 04:57 PM
Yes I have seen your write up Sli 85. We all know you have a bad ass write up. Kudos to your project looks and turned out great. I am not a fan of cutting up my radiator support but I also wish I had the air flow of a clutch fan... but as we all know s13 rb25det setup leaves your with little space for clutchfan

The Dude
09-28-2012, 05:36 PM
You really should run a shroud. You don't need super expensive fans as long as you have them wired to turn on and off at appropriate temps.

Sileighty_85
09-28-2012, 05:51 PM
Yes I have seen your write up Sli 85. We all know you have a bad ass write up. Kudos to your project looks and turned out great. I am not a fan of cutting up my radiator support but I also wish I had the air flow of a clutch fan... but as we all know s13 rb25det setup leaves your with little space for clutchfan

Thanks, but if you looked more closely you notice that I did not have to cut my upper core support to fit everything. If your not running a condenser then it def should not be an issue

welts12786
09-28-2012, 08:17 PM
Sil your running FAL fans right. I saw that. Looked like you were running FALfan > AC > RAD am I wrong? I am running on a switch with a Nismo stat so constantly on

AS240
09-28-2012, 08:24 PM
im running 2 10" ebay pushers and a mishimoto rad. temp stays right at 180degF, even on 100deg days. are you running a stock ka radiator?

welts12786
09-28-2012, 08:41 PM
Cheap Ebay radiator 2 row aluminum. I had it on my KA and worked like a champ

Bentleyness
09-29-2012, 12:22 AM
yea those ebay one are good i had one and sure helped with the temp and ran cooler too, i also ran a lower t stat on my old ka, i use a relay 7$ at autozone and wired it up so when my head lights turn on fan is on.

fufanu180
09-29-2012, 01:57 PM
Did you know a stock ford taurus fans push 2500 cfm on low speed and 4500 cfm on high speed. Single fan as well