View Full Version : Can you wire Isis fans as pushers
Fredward
09-26-2012, 01:15 PM
Hello. I searched for a while for this. I'm doing an rb swap into my s13 and am shopping for electric fans. Does anyone know if the Isis fans w shroud can be wired up as pushers? The FALs specifically sell fans as pushers or pullers and I believe their fan blades are different. A can I just wire them backwards and make them pushers?
I also can't find their flow rate anywhere. Any help would be appreciated thanks
godrifttoday
09-26-2012, 02:02 PM
Reverser the polarity
91ka24
09-26-2012, 02:12 PM
Man those fans are not gonna keep your motor cool enough in a s chassis. My girls car has an Rb in her s13 with the isis fans and it would get hot after 2 runs at a drift event. So I put fal's in as pushers and never have a problem now. Just my .02 though
s13mikesr20
09-26-2012, 02:37 PM
reverse wires or flip the fan around but best e fans on market is flex lite fans
best setup i have ever seen stock fan and fan shroud with flex lite fan pushers
i beat on that car for a hour strait and didnt over heat at all run out of gas before the temp even went up a centemeter
Fredward
09-26-2012, 02:46 PM
K thanks. Looking for used fals
fullthrottle
09-26-2012, 03:02 PM
Lol I found you fredward
Sent from my SGH-T769 using Tapatalk 2
Fredward
09-26-2012, 03:10 PM
Haha yes you did scotch. Apparently the Isis fans are half the price for a reason
ray666
09-26-2012, 06:20 PM
ive never had a problem with the isis fans
roboticnissan
09-26-2012, 06:22 PM
Fal kept my guage from reading anything daily driving so id go with those.
Fredward
09-26-2012, 07:50 PM
Does anyone know the cam rating on the Isis fans?
d-macs13
09-27-2012, 01:36 AM
The ISIS fans suck man they have the worse rating i forgot what they were but i called Ken at Enjuku and compaired the Cxracing fans and they are way better. Also my good friend had a Rb25det with them and he over heated after every run, now he runs the flex-lite fans with no over heating problems at all :)
d-macs13
09-27-2012, 01:47 AM
But if you still want to use them as pusher fans then just swich the wires. make the negitive wire positive and the positive wire negitive
2muchboost
09-27-2012, 07:53 AM
Someone on another local forums did a write up on using Altima OEM fans and they seem to have worked better than some aftermarket fans and are cheaper alternative.
Fredward
09-27-2012, 12:10 PM
Yeah I read that. Thanks for all the help, I just ordered some used FALs. Now I just need to wrap my head around the wiring
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.