help with oem fan and shroud

[djfiniki]

I have an S14 with an S14 SR and was wondering if the KA fan and clutch will fit an SR shroud.:hyper::hyper:

[F7Flare]

I had a s13 with s13 sr20det and the ka fan could hit the shroud.
best way is to bolt up the fan and rotate it by hand and see if there's clearance.

[mewantkouki]

A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka fan.

[chetos13]

I've seen s14 with clutch fan removed and installed a Altima dual fan to the radiator, looks great looks perfect

[djfiniki]

[QUOTE=mewantkouki;4920064]A ka fan will hit the front part of the head of an SR you have to notch the backside of the blades a little. As far as it fitting under a shroud, that would be a test fit type scenario. It should fit though as the sr fan is offset further forward than a ka

THANKS.

[djfiniki]

I've seen s14 with clutch fan removed and installed a Altima dual fan to the radiator, looks great looks perfect


I have dual fans already, but thanks.

[TheRealSy90]

The ka fan clutch wi not fit on Sr.

[wangan_cruiser]

Ka fan clutch and fan will work. Fan clutch will fit but the fan itself will hit the sr crank. Just need to shave each blade until u get the clearance to make it work. Its not hard. I currently run it on on my sr. No problems

[KendallH]

KA clutch fan will not work on SR. The blades will be too close to your belts and accessories. You must get an SR fan clutch. You can use the KA blade on the SR clutch, but you must use an SR clutch.

[lilpiton]

yea it not gonna work. you can just but the sr lades of like 40 bux OEM BNIB from nissanparts.cc. that's what im doing now..