PDA

View Full Version : rb25 cts problem


davidg01234
09-22-2012, 07:47 PM
My rb25 won't start when it gets warmed up. But if I unplug the cts it starts right up. Tried replacing it and the same thing happened. But if I plug the cts back up after I start it, it runs fine then. Did I just get another bad cts, or is it something else?

davidg01234
09-23-2012, 10:31 AM
anybody have an idea??

OutToWinPAHC
09-23-2012, 11:56 AM
Two wire CTS? Operates with the same signal ground as many other sensors, you may want to check the wiring point to point and then just try another sensor. I have nabbed a few from junkyards.

davidg01234
09-23-2012, 12:35 PM
Two wire CTS? Operates with the same signal ground as many other sensors, you may want to check the wiring point to point and then just try another sensor. I have nabbed a few from junkyards.

yup the one for the ecu not the gauge. ive already tried another one with same results. BUT i think i found my problem, im thinking its the battery because if i jump the car off with another car, itll fire right up with it plugged in.

davidg01234
09-23-2012, 12:42 PM
im only using a 540cca small honda battery lol. it worked fine for a long time but now im thinking its dead and is causing my problem