dawagarage
09-19-2012, 08:12 PM
so i went to my storage and pulled out my 'other' Navan bumper (which is in better than the one i have for $250, thus the title.)
this one was involved in a curb hoping incident ;(
overall:
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po1_1280.jpg
left fender mounting location:
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po3_1280.jpg
same area, approximately 8" of seperation
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po4_1280.jpg
^this seems to be a common weakpoint in these bumpers, my other bumper started to do the same thing, you will see in the next picture...
...that a previous owner had tried to fiberglass it. unbeknownst when i bought it. on my other bumper, i just ziptied these 2 together.
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po5_1280.jpg
driver fender mounting location
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po2_1280.jpg
driver bottom (same area broken on bottom as ^pic)
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po9_1280.jpg
passenger bottom scratches from curb jumpage
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po8_1280.jpg
middle area, less scratches
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po7_1280.jpg
driver bottom scratches
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po6_1280.jpg
it should be noted that the breaking of the top and bottom tabs of the driver side causes that area to somewhat flex inward. i feel this would be alleviated if one were to install that metal mounting plate that is supposed to go there.
price: SOLD (not including lights/signals/mesh)
reasonable offers will be considered
-want all the lights? (working, will provide photos) add $100.
this one was involved in a curb hoping incident ;(
overall:
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po1_1280.jpg
left fender mounting location:
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po3_1280.jpg
same area, approximately 8" of seperation
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po4_1280.jpg
^this seems to be a common weakpoint in these bumpers, my other bumper started to do the same thing, you will see in the next picture...
...that a previous owner had tried to fiberglass it. unbeknownst when i bought it. on my other bumper, i just ziptied these 2 together.
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po5_1280.jpg
driver fender mounting location
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po2_1280.jpg
driver bottom (same area broken on bottom as ^pic)
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po9_1280.jpg
passenger bottom scratches from curb jumpage
http://25.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po8_1280.jpg
middle area, less scratches
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po7_1280.jpg
driver bottom scratches
http://24.media.tumblr.com/tumblr_mamlvbGPC61qe7x6po6_1280.jpg
it should be noted that the breaking of the top and bottom tabs of the driver side causes that area to somewhat flex inward. i feel this would be alleviated if one were to install that metal mounting plate that is supposed to go there.
price: SOLD (not including lights/signals/mesh)
reasonable offers will be considered
-want all the lights? (working, will provide photos) add $100.