PDA

View Full Version : Hopped a curb. Now engine is running rough!?!


jaymelz324
09-16-2012, 08:59 AM
What's up guys. The other day I hopped a curb with my s13 and all the sudden it starts running rough. I thought I had a flat but wen I pulled over my tires were fine but my car was still shaking while idling. It almost feels like I'm constantly running out of gas. So, I started my car, n starred pulling plug wires one by one. When I got to the third wire, there was no change in the idle which tells me its the third cylinder that's having issues because all the other wires being pulled caused it to run even rougher n eventually stall. I checked out the dizzy cap and rotor and the cap was fine but the rotor was worn so I replaced it.. no change. I also switched up the wires between #3 and #4 plug and wire and it still is the number 3 cylinder which tells me the plugs and wires are fine or else the problem would have moved to #4 cylinder. Any help is much appreciated thanks guys. Oh btw the car is a 90 sohc with 181k stock 5 spd.

Sent from my EVO using Tapatalk 2

future
09-16-2012, 09:57 AM
Make sure the ingector is plugged in

Taylor008
09-16-2012, 05:43 PM
Have you pulled injector plugs?

jaymelz324
09-16-2012, 06:00 PM
I will do that tomorrow. I just don't get how hopping the curb can cause the engine to run like that

Sent from my EVO using Tapatalk 2

Lunghz
09-16-2012, 06:18 PM
I will do that tomorrow. I just don't get how hopping the curb can cause the engine to run like that

Sent from my EVO using Tapatalk 2

Ever consider the force of the impact? your car is 20+ years old, the parts aren't as tuff, as they were brand new.

Mishkin_707
09-16-2012, 10:49 PM
Ever consider the force of the impact? your car is 20+ years old, the parts aren't as tuff, as they were brand new.

This, what were you doing jumping curbs anyways?

Kingbaby
09-17-2012, 04:01 AM
Making a YouTube video!

He can't drift this accident - YouTube (http://www.youtube.com/watch?v=AwbPj-mqCkw&feature=youtube_gdata_player)

Mishkin_707
09-17-2012, 05:19 AM
LMAO!!!!!


Damn that crunched

rwtf
09-17-2012, 05:51 AM
lol nice dude, very nice.

claytoncallihan
09-17-2012, 08:25 AM
My buddy had a lil jump in his old car years back and messed up motor mounts bad enough to were you could feel the motor moving up and down, even tapping on the hood o_O. But if youve been messing with the cylinders and found something that is really strange...

Darren
09-17-2012, 09:10 AM
i'd be surprised if you didn't bend your LCA or strut in that... but yeah, as the others said, old cars + jarring = strange problems.

Good luck, sounds like you're on the right path

jaymelz324
09-17-2012, 09:17 AM
I thought it might b mounts but when I disconnected cylinder three there was no change in the way it runs so yea I donno...gotta check injectors after work. I also replaced cap n rotor with no success.

Sent from my EVO using Tapatalk 2

jaymelz324
09-17-2012, 07:08 PM
Yea def not mounts... #3 cylinder injector was pulled and engine ran the same. Tomorrow im gonna check pulses goin to the injectors with a multimeter and if they are getting juice then that narrows it to a bad injector, right?

Sent from my EVO using Tapatalk 2

nicks13chandler
09-18-2012, 01:07 PM
same thing happened in my miata something was rubbing the motor (rack, chassis, sub frame) something could have bent and your car feels the motors vibrations that's what happened to mine.


Posted from Zilvia.net App for Android

jaymelz324
09-18-2012, 01:23 PM
If it was the subframe or mounts, the engine would run rougher when I disconnected the things listed above so no its not the subframe its the engine itself. I put a multimeter to the injector harnes and was getting around 13 volts so I kno its getting a signal. Do you guys think its a bad injector? Idk what to do..

Sent from my EVO using Tapatalk 2