Sale for the low ballers!

[Imarvin240]

- If you low ball me even more then I have listed, I won't even respond to you...simple as that.
- If its not listed below, I don't have it for sale!
- Please bump the thread when you view it, thank you.

Invert Mini
- Works perfect, I just don't play anymore
- $100
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/378307_10151117808466754_1089304979_n.jpg

PBM Spacer Packs 4-lug (each pack has a set...I have two packs, so enough for all four wheels) I WILL NOT PART OUT THE SETS!
- BNIB (Brand New In Box)
- $150 Per Pack $275 for both (I had to wait 3 months to get these from PBM)
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/535734_10150973055166754_526896753_11851564_170487 5841_n.jpg

Axxis S13 Ceramic Front Brake Pads
- BNIB
- $40
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/485894_10150973223761754_526896753_11852017_140468 377_n.jpg

S14 A/C Bezel
- All tabs are broken
- $10
http://sphotos.xx.fbcdn.net/hphotos-snc7/379317_10150973236516754_526896753_11852042_587783 350_n.jpg

SR Timing Chain Tensioner
- ~3k miles
- Perfect Shape
- $30
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/420668_10150723302656754_526896753_11266504_177396 3129_n.jpg

Cam Angle Sensor
- ~3k Miles (purchased NEW)
- PERFECT SHAPE!
- $120
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/419872_10150723255911754_526896753_11266170_158037 859_n.jpg

Cam Angle Sensor Gasket and O-ring
- Perfect Shape
- $5
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/582127_10151117824941754_1095955387_n.jpg

Intake and Exhaust Cam Gear Bolts
- PERFECT SHAPE!
- $3 each
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/389608_10150742104266754_526896753_11334834_230685 035_n.jpg

SR20 Head Bolts
- Used
- $15
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/391521_10151117825236754_1233010837_n.jpg

KU Engineering S13 Intake Manifold
- Never Used (just sitting around for about 3yrs, but the last owner drilled injector port 1 larger to put larger injectors in but then sold it to me...costs about 60 to do it to the other 3 or 40 to correct port 1)
- $110
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387242_10150480663521754_526896753_10439243_731518 754_n.jpg

SR20 Upper Oil Pan - SOLD!
SR20 Oil Pump - SOLD!
SR20 Oil Screens (2 sets)
SR20 Rear Crank Case Cover (3)
SR20 Oil Block Galley w/ Sensor (2)
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/396250_10150613024401754_526896753_10920871_747358 470_n.jpg

Unknown Brand BOV
- Slightly Used
- PERFECT SHAPE
- $50

SR Main Cap Girdle
- PERFECT SHAPE
- $15 each
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/533372_10150834795496754_526896753_11628504_135650 5300_n.jpg

SR Coolant Tubes - $20
SR Short Coolant Tubes - $5
SR Temp. Sensor Housing - $10
SR Thermostat Housing - $10
SR Coolant Inlet - $10
SR Coolant Complete Setup w/ Sensors - $45
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/527221_10151118980776754_1330060689_n.jpg

OEM SR20VE P11 Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- Valves - $50
Springs - $25
Retainers - $15
Camshafts - $50
Gears - $10
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419996_10150615750161754_526896753_10929456_203418 5802_n.jpg

SR20DET AAC Valve
- PERFECT SHAPE
- $30
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/268390_10151117824486754_1518170587_n.jpg

S14 SR Valve Cover w/ Coil Pack Cover
- Perfect Shape
- $160
http://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/483292_10151117806246754_1759643063_n.jpg

stock KA24de airbox intake system and Filter is still clean (came from a 98' kouki)
- PERFECT SHAPE
- $50
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/395569_10150613036421754_526896753_10920911_184224 8499_n.jpg

S13 Non-ABS Driveshaft - Pick up only
- Used
- $90
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/251844_10150996375441754_526896753_11928624_125583 8261_n.jpg

S13 SR Transmision - Pick up only
- Roughly 30k miles
- PERFECT SHAPE
- $140
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/581233_10150834790411754_526896753_11628495_953830 84_n.jpg

S13 SR20 Intake Gasket
- PERFECT SHAPE
- $10
http://sphotos.xx.fbcdn.net/hphotos-snc7/578087_10150996378901754_1024923681_n.jpg

S13 SR Bell Housing
- No cracks
- $40
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/564085_10151117824271754_656643891_n.jpg

S13 SR release bearing
- Good Condition
- $10
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/s720x720/563891_10151117807086754_1542660424_n.jpg

S13 SR Clutch Fork
- Perfect Shape
- $20
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/547715_10151117810956754_1522119873_n.jpg

SR20 Timing Chain guide
- Perfect Shape
- $10
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/s720x720/208835_10151117803836754_1132037713_n.jpg

S13 SR Valve Cover Baffeling
- Great Shape
- $10
http://sphotos-a.xx.fbcdn.net/hphotos-snc6/s720x720/205392_10151117824711754_230142896_n.jpg

SR NGK Iridium Spark Plugs (heat range 8)
- NEW IN BOX
- $30
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/s720x720/8042_10151117835316754_967807540_n.jpg

SR20 Coilpack Gaskets
- NEW
- $3 each
http://sphotos-b.xx.fbcdn.net/hphotos-snc7/s720x720/306862_10151117804861754_635118492_n.jpg

S13 SR20 Valve Cover Gasket
- Perfect Shape
- $15
http://sphotos.xx.fbcdn.net/hphotos-ash3/179381_10150996377131754_633498064_n.jpg

Injector Gasket O-rings
- Perfect Shape
- $3 each
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/531730_10151117835861754_1774072589_n.jpg

SR20 Rear Main Seal
- New In Box
- $18

(8) SR20 Hydraulic Lifters
- Perfect Shape
- $5 each
http://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/482040_10151117834446754_1000631996_n.jpg

(3) SR OEM Rod
- Great Shape
- $10 each
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/426766_10150613024081754_526896753_10920869_141501 1659_n.jpg

SR OEM Exhaust Manifold
- Perfect Shape
- $40
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/558022_10151117809826754_1698690365_n.jpg

SR20det Exhaust Gaskets (t3, T4, Exhaust mani)
- Perfect Shape
- $20
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/s720x720/387004_10151117825516754_1915179614_n.jpg

Crank Pulley Bolts (2)
-Perfect Shape
-$5
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/430968_10150664145311754_526896753_11067863_185757 1698_n.jpg

Transmission Mount Brackets
- Perfect Shape
- $15 each
http://sphotos.xx.fbcdn.net/hphotos-ash4/401191_10150664161831754_526896753_11067931_429516 216_n.jpg

Alternator Brackets
- Perfect Shape
- $20 each
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/432308_10150664167686754_526896753_11067939_104651 3063_n.jpg

Knock Sensor (4)...one doesn't have a sub-harness
- Perfect Shape
-$25 each (15 for the one without the sub-harness)
http://sphotos.xx.fbcdn.net/hphotos-ash4/419805_10150664174196754_526896753_11067961_194880 5439_n.jpg

Godspeed Arm - $15
S13 Rear Links - $10 each
S13 Front Lower Control Arm - $30
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/527865_10150834796161754_526896753_11628506_861054 377_n.jpg


\/ \/ \/ 350Z PARTS \/ \/ \/

350z LSD
- ~15k miles
- $200
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/432218_10150650103851754_526896753_11029059_786778 865_n.jpg

350z OEM Suspension Links
- ~15k miles
- Perfect Shape
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/578017_10150834796931754_526896753_11628510_602944 547_n.jpg

350z Master 1 1/16th
- Perfect Shape
- $45
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/311300_10150480660336754_526896753_10439232_184169 1997_n.jpg

350z Brake Booster
- Perfect Shape
- $100
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/375534_10150480661776754_526896753_10439236_140716 3513_n.jpg

350z 03' tinted tail lights
- Great shape
- $75
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296301_10150443557066754_526896753_10313803_891397 841_n.jpg

350z OEM Fuel Tank
- ~20k miles
- Perfect Shape
- $90
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/386930_10150441022336754_526896753_10306956_637312 489_n.jpg

350z Seats
- ~20k miles
- $300
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312088_10150442097401754_526896753_10309990_409811 740_n.jpg

350z oem Radiator
- ~20k miles
- $100
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/318612_10150463727896754_526896753_10387765_723530 003_n.jpg

350z oem Radiator Support
- ~20k miles
- $100
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419029_10150614367566754_526896753_10925209_371548 961_n.jpg

350z Front Bumper
- ~20k miles
- $150



These are all the make an offer items...i dont want or need them so just make an offer...pictures of these upon request.

\/ \/ \/ 2005 WRX (less then 20k miles on items)\/ \/ \/

OEM Air Box Setup
OEM Downpipe
OEM Full Exhaust
OEM Uppipe
OEM Turbo Heat shield

\/ \/ \/ Auto 200SX SER Engine Part Out \/ \/ \/

Head (currently has valves, springs, retainers, and keepers but can remove if buy requests)
Rocker arms
Oil tubes in SR head
Intake and Exhaust cam gears
Valve Cover
EGR valve (in WORKING order)
distributer (in WORKING order)
Headers
Injectors w/ Fuel rail
Water Pump
Water Pump pulley
oil filter block
crank pulley
Intake Manifold (perfect Condition w/ all connectors and hoses)
(3) Pistons
(3) Rods
Coolant tubes
Coolant outlet
Lower Oil Pan
Oil Pan baffling
Timing chain tensioner
Flex Plate
Auto trans gasket
Alternator bracket
intake bracket
power steering bracket
ac bracket
Auto 200sx Engine Harness (completely uncut)
injector harness
tps (throttle position sensor)

Thank You For Looking!

[Rob's S14]

How much to ship the intake to 92620?

[psychos13]

still have them pbm bolt on spacers lmk

[VYKTR]

PM sent for the Transmission Mount Crossmember.

[Imarvin240]

Bump it up!

[jjewell21]

Send pic of bov to 205 369-0673 plz cash inhand

[enohand]

whats pistons are the 54c or 79E?

where in philly are you?

[Imarvin240]

Bump it!!!

[SSCACAHUATES]

Buuuummmmpppp!!!

[Imarvin240]

final bump...taking a ton of it to a recycling yard next month if it doesn't sell hah might as well clear out space an make a few bucks if it won't sell.

[enohand]

still want to know which pistons & rods they are.

see my above post

[psmith]

bump. Pm sent for Oil Block...

[enohand]

o wait....are the pistons & rods from the 200sx? IE a SR20de, non T?>?

if so then nvm

[Imarvin240]

o wait....are the pistons & rods from the 200sx? IE a SR20de, non T?>?

if so then nvm

yes, they are listed under the 200sx sr20de section.

[Shally2186]

is the cam angle sensor still for sale?

[moskoxxx]

how much for s14 coil packs cover shipped to 92173 ?

[cherman240sx]

how much to ship one of the alt brackets and a knock sensor with harness to 87124 new mexico

[cherman240sx]

oh and the complete coolant setup with sensors.. and if i buy all three items are you willing to drop price at all or cut a break on shipping?

[TheRealSy90]

Do you have any rocker arm guides? Maybe the ones from the 200sx? How much for those and the rockers?

[counter_motion]

pm'd about the PBM spacers

[Shally2186]

hey please clear ur inbox. i can't pm u. thanks

[Lueee10]

check your pm sir!

[eZiR- rps13]

interested in the tranny/exhaust bracket shipd to 92154?

[ds13]

i need a KA knock sensor

[Lueee10]

ill pay your asking price for invert. just tell me how much for shipping and send paypal through pm get back to me

[WhipsGoneWild.net]

what size spacers are those??

ttt for KOP


hey please clear ur inbox. i can't pm u. thanks

whats up man?!

[heaterlif3]

ku engineering intake, can u send me a picture please. thankyou . send it to [email protected] i would like to buy it asap

[wrxkid950]

$50 for mini? and do u have the 5spd cross member?

[89project240]

How much for all 8 lifters shipped to 99504?

[slideslidegnarslide]

I'm interested in the trans pm me

[othondls]

Do you still have the tram and are you located

[heaterlif3]

7179168423, u didnt respond to my last email 2 ya. call/text me ill come get that KU ENG. intake. please! thanks

[heaterlif3]

7179168423, text me when i can get that intake manifold. please.