Ready for sr20det

[DrDriftS14]

ok i sold my 2nd gen RX-7 and im ready to buy a s14 sr20det, has anyone delt with ADR performance? because i think that where im gonna buy it, thier SR's are $1595 and the half cuts are like $3400 and thats pretty decent. are they a good company with good product? let me know, also what are some good wings for drifting?

[the head]

you dont need a wing for drifting wings add downforce adding traction traction is bad for drifting ie wings are bad for drifting
if you want a wing than pick out one you like beacuse it dosent matter

[Flybert]

Last time I checked, traction is great for drifting.

As for wings that are good for drifting, APC wings are off the chain. Even the big drifters are sponsored by APC. I'm guessing that you didn't get the memo.

[Hawd]

24 inches no less. size matters when it comes to wings...

[Fibercus]

Traction = Predictability

[Hawd]

wings pull in hoes as well. You are guaranteed to have a few females breaking thier necks on your vehicle when they see how big of a wing you have.

Tuners like to comment on the look as well.

[FastBack 240]

What I think they are trying to say DR. is that you don't really need a wing. Leave the wings to the honduh boys.

[the head]

:werd:
there is no good wing for drifting because no wing will improve your drift

is the KA in your 240 blown there is also no point to tossong a good motor for one that has been in a junkyard in japan for god know how long

Steps for the drifter
1. get your car
2. drive your car and learn how to control it
3. modify the thing as shit breaks

i know someone will bring up thta i did not do this but i had a car where EVERYTHING was already broken (blown motor and over 250,000 on the chassis with nothing except tie rods replaced) so i had to start at step 3

[Hawd]

I sense the sarcasm detectors are going off in this thread :)

[DrDriftS14]

Ok but for some reason taniguchi's S15, Kazama's s15, drifter X, and XL's S13s ,koguchi's S13, yamashita's 350z, and most others have wings? well fuck i guess the pro's dont even know whats good for drifting. downforce=taction which is good for drifting. and the main Q was has anyone delt with ARD performance??

[DrDriftS14]

:werd:
there is no good wing for drifting because no wing will improve your drift

is the KA in your 240 blown there is also no point to tossong a good motor for one that has been in a junkyard in japan for god know how long

Steps for the drifter
1. get your car
2. drive your car and learn how to control it
3. modify the thing as shit breaks

i know someone will bring up thta i did not do this but i had a car where EVERYTHING was already broken (blown motor and over 250,000 on the chassis with nothing except tie rods replaced) so i had to start at step 3

WTF is wrong with this guy? ok ur opinion on how to tune cars is just that opinion and in this case a bad one, and im pretty confedent i know how to control my car after about 3 years of drifting. this ones for you DickHeadhttp://thispageintentionallyleftblank.net/images/misl/shut_the_fuck_up.jpg

[MovinUp-1]

Your kinda quick to call people names over the internet. A calm reply is often the better choice.

As for ADR Performance, never heard of them. 1500 for an SR is too cheap though. Did they say what that includes? Does the motor have a complete, uncut harness, ecu, ignitor, maf, etc?

[mjjstang]

im sure that 1500 is just engine tranny, as he stated clip is 3400, that is 1900 more, im sure they are not charging 1900 more for the misc parts on a clip and the shell.

[DrDriftS14]

im sure that 1500 is just engine tranny, as he stated clip is 3400, that is 1900 more, im sure they are not charging 1900 more for the misc parts on a clip and the shell. 203 [email protected] 4800 RPM

..

SR20DET S14 Black Top Engine Packages
2.0 DOHC 16V Turbo Nissan Motor. The S14 fits the 95+ 240SX. Rear Wheel Drive Configuration. Please consult with a mechanic for any other fitments or necessary parts.


S14 Black Top Engine, Turbo, Trans, ECU, and Auto Trans for $1595.95

Engine Code SR20DET S14 If you are ready to buy a motor and want the freight charges click here

Displacement/Valve Layout 2.0L DOHC Turbo 16V VTC Variable Valve
Turbo Type Garrett T28 Ball Bearing
Horsepower 217 hp @ 6000RPM
Torque 203 [email protected] 4800 RPM

[FastBack 240]

all i know is if you are so good at drifting and call yourself a Vet. you should definately know what a good wing looks like!!!

[mjjstang]

OH IM SORRY, and ecu. engine tranny and ecu, no need to mention that it has a turbo. ive never seen an engine tranny package that didnt have a turbo on it, turbo is gaurenteed, but its not gaurenteed to work.

so ur tellin me that for that price they give you a trans, and an auto trans. thats so nice of them.

[HyperTek]

shoulda kept your FC for drifting... 240s now are getting more attention, bound to become higher on the food chain of theft..

Too bad your not in socal, a 20minute drive can visit a showroom of sr20s to choose from. hehe

[Hawd]

shoulda kept your FC for drifting... 240s now are getting more attention, bound to become higher on the food chain of theft..

Too bad your not in socal, a 20minute drive can visit a showroom of sr20s to choose from. hehe

may i ask where this show room of sr20's is located in LA?

[90sr]

Yeah wow thats awesome I just got done with my SR20det swap and i got the motor out of ARD performance, the help there is great the people are really nice and the motor was in pretty good condition, i mean your probly going to upgrade anyways but it was still in nice condition the turbo was in great shape the cam wasnt dried out and i had paid a little over 2200 for mine cuz they had less motors at the time but im sure the same quality is going to be in these ones so id say go for it and ask to consult with FRANK thats who i talked to and he was a real good help. Also i have a question where can i get an oil filter for the sr20, i found a website a while ago that had em but i lost it unfortunately but i wana buy like 10 of em sumwhere and i have no idea where to find em, thanks alot and goodl uck with your motor.

[nataku12]

RB25DET R33 Skyline
2.5L DOHC Turbocharged Nissan motor. Note: This motor can be made to fit S13,S14, or 300ZX. Includes the whole front clip (no body parts) including everything in the engine bay. Please consult with a qualified swap mechanic. Note: Body parts are not usually included in front clips, however when they are included, they are considered freebees only and will not be replace if damaged or unusable.
RB25DET- R33 Half Cut (Front Clip) $2695.95

Engine Code RB25DET R33 If you are ready to buy a motor and want the freight charges click here

Displacement/Valve Layout 2.5L Inline 6Cyl 24V Turbo
Horsepower 250 hp @ 6400RPM
Torque 217 [email protected] 4800 RPM



(I"m a newbie..)... by front clip, does that mean it is "supposed" to come with everything needed to swap except the transmission... ? or should i assume nothing? and how come this engine is cheaper than the sr ???? i don't get it....

please enlighten one so ignorant =)

[RedlineRacer]

Cause its an rb25, and everyone wants and sr these days. rb25's are just hard to put into a 240 without dropping alot of money and spending alot of time modding one it. The demand for rb25's isn't that high.

[oojpeeoo]

ok i sold my 2nd gen RX-7 and im ready to buy a s14 sr20det, has anyone delt with ADR performance? because i think that where im gonna buy it, thier SR's are $1595 and the half cuts are like $3400 and thats pretty decent. are they a good company with good product? let me know, also what are some good wings for drifting?

wuts their website

[NismoSilvia270R]

whats the website?