Linux2501
08-29-2012, 07:05 PM
Alright so when I rescued this 240 I had been a 3kgt owner since I was 16, and so all this is new to me. I know my way around my 3k but this is new and im wanting to learn. But when i got the 240 it had 330k original miles on the engine. Slung a rod through the block and into the a/c bracket and into the a/c compressor. So i pulled the engine and carelessly didnt mark anything because I thought it would be simple to drop back in like my 6g72 was. built a fresh ka24de. now i have all the plugs plugged in, go to start my car and it wont kick the starter so i do some searching and my fuel pump wont cut on. checked my relays. all good. look at the 75A fuse and its blown and its an ALT fuse. and when i bridge the connection it brings everything on now when i start the car it still doesnt prime the pump and still doesnt engage the starter. starter is good because i can take a 12v hot wire off the batt and put it on the signal wire and it turns over. also i have a couple of things here and there like possible grounds i need help either identifying or something please help i need another daily and havent dumped much into it other than building this engine.