240srhatch
08-27-2012, 02:48 PM
https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/425055_494964580517506_1247355370_n.jpg
So here it goes, Im probably going to regret this but I must step out of racing for a while.
Up for sale is my 2000 BMW 323i E46 4dr sedan, now this car has almost nothing bmw left in the car. The car was built to compete in the Formula D ProAm series, as well as XDC. This is a full race car and is not intended for road use :nono:(your decision). Take a look at all the mods this car has undergone.
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0029.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0014.jpg
GENERAL INFO
-Car has been stripped off the factory BMW wiring harness and was rewired by me at my shop J3 DriftLab with a painless RACE Car setup. All the windows and sunroof were removed for weight purposes as well as all the un-needed interior parts in order to fully cage it.
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/417657_494807990533165_2029521943_n.jpg
ENGINE
-1JZGTE Swap off a MA70 JDM Supra
-R154 5spd trans w/ Marlin crawlin shifter bushing
-OS-GIKEN Pull to Push style clutch conversion
-2JZ Engine Harness (has been simplified to bare minimum and fully tucked) Done by J3 DriftLab
-Runing on 2JZ coilpacks, map sensor, and igniter)
-Case-Fab engine/trans mount brackets
-SPP Shifter extension & flipped shifter mod
-Fully Rebuilt Cylinder head (new supertech valve seals, hot tanked, lash adjusted, decked)
-Brand new Toyota OEM Multi layer metal head gasket
-ARP Head Studs
-Fully regasketed/resealed motor.(valve cover gaskets, intake manifold gaskets, cometic multi-layer exhaust manifold gaskets, throtle body gasket, front & rear main seals)
-Drift motion exhaust Manifold modded for t3 flange
-Precision SC61 Turbo
-Tial 44mm V-band wastegate
-stainless steel braided oil feed and return lines for turbo
-JDM 2JZ fuel injectors flowing at 520cc @48psi fuel pressure
-Aeromotive FPR w/ gauge set at 48psi
-Walbro 255LPH Fuel pump
-Tuned on AEM EMS standalone for 2JZ
-brand new 2jz water pump upgrade
-new timing belt & tensioner
-J3 DriftLab A/C Delete Kit w/ specific accs belt
-2JZGE accs belt tensioner (metal instead of plastic pulley)
-AICV Delete
-Driftworks Aluminum Water pump Pulley
-Driftworks Alum Power Steering Pulley
-NEW OS-GIKEN SuperSingle HD Clutch
-ChaseBays SSB Power steering lines
-Custom Aluminum Nascar style power steering reservoir
-Custom Coolant reservoir
-Custom Oil Catch can
-4Row custom aluminum radiator
-Mishimoto Rad Fans w/ shroud
-Samco silicone radiator hoses
-Mishimoto Low Temp Thermostat
-J3DriftLab custom front mount intercooler setup
-Blitz blow off valve
-V-band 3" Downpipe
-J3DL 3" straight pipe exhaust
-J3DL Oil pressure sending unit relocate kit
-SPP custom lower rad support to acomodate radiator and intercooler
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0049.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/580882_500067503340547_1788967099_n.jpg
SUSPENSION/BRAKES/WHEELS
-Blistein Coilover suspension
-SPP Rear Subframe Mounts Reinforcement Plates
-Eibach Front swaybar
-DriftTough Rear Camber Arms
-Complete ABS Delete
-All new hard lines (custom)
-SS brake line ends to calipers
-330ci front brake upgrade (rotors/pads/calipers)
-330ci differential w/ axles (welded by SPP)
-E36 M3 rear calipers and rotors
-330ci inner and outer tie rod ends (thicker)
-Breyton Wheels 18x9 +16 Front and 18x9.5 +16 Rear
-Hankook 225-40-18 Fronts 80%left and Nankang 275-35-18 Rears with about 50%left
-20mm hubcentric spacers on the rear w/ extended lug bolts
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0009.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0010.jpg
EXTERIOR
-Painted PaperWhite (2months old)
-Rear widebody ZG fender flares
-APR GT-500 Carbon Fiber HUGE Spoiler
-M3 style ricer mirrors
-Brand new windshield
-Brand new 330i front bumper
-Brand new 330i rear bumper
-Brand new 330i fenders
-Brand new 330i 2G hood
-Brand new 330i headlights
-Brand new clear corner lights
-S14 front bumper lights :D
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0002.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0012.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/544645_500062313341066_2036844453_n.jpg
INTERIOR
-SPP Cage by CageDave
-Sparco Evo2 Racing seat
-F1 Racing passenger seat
-Sparco seat harness
-Generin passenger seat harness
-Autometer Oil Pressure gauge
-Autometer Boost Gauge
-Autometer Water Temp Gauge
-AEM Wideband gauge
-Apexi SAFC NEO used for its display
-generic quick release
-Casefab custom steering wheel short hub
-Nardi leather legit steering wheel
-fire extinguisher
-E-brake lever extension (works awesome)
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/396779_502266913120606_955221394_n.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN9999.jpg
Im sure I forgot to mention alot of parts but thats the most important things. Best of all is that you would never have to worry about rust on this car. Now remember this car is for RACE USE ONLY so dont expect to drive it on the street without getting pulled over.
Here is a quick video I found. More to come.
https://www.facebook.com/v/10151990837000347
Recent photoshoot album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/
Complete build album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/E46%20Build%20from%20day%20one/
Im only asking for $13,500 OBO (originally asking $18.5k) for the car or to trade for something nice I can drive on the streets. I already have a 1100whp R33 so im looking for something more practical. Contact me at 240-506-6858 TEXT PREFFERED!
I'm really looking into trading for a s15, g35, 350z or even a nice 240sx plus cash.
Please keep in mind as far as trade my car is worth way over what im asking for it, I have it posted way under what its worth in order for a fast cash sale.
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/318770_494966263850671_1737434612_n.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0026.jpg
Here is the whole photobucket album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/
Complete build album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/E46%20Build%20from%20day%20one/
So here it goes, Im probably going to regret this but I must step out of racing for a while.
Up for sale is my 2000 BMW 323i E46 4dr sedan, now this car has almost nothing bmw left in the car. The car was built to compete in the Formula D ProAm series, as well as XDC. This is a full race car and is not intended for road use :nono:(your decision). Take a look at all the mods this car has undergone.
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0029.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0014.jpg
GENERAL INFO
-Car has been stripped off the factory BMW wiring harness and was rewired by me at my shop J3 DriftLab with a painless RACE Car setup. All the windows and sunroof were removed for weight purposes as well as all the un-needed interior parts in order to fully cage it.
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/s720x720/417657_494807990533165_2029521943_n.jpg
ENGINE
-1JZGTE Swap off a MA70 JDM Supra
-R154 5spd trans w/ Marlin crawlin shifter bushing
-OS-GIKEN Pull to Push style clutch conversion
-2JZ Engine Harness (has been simplified to bare minimum and fully tucked) Done by J3 DriftLab
-Runing on 2JZ coilpacks, map sensor, and igniter)
-Case-Fab engine/trans mount brackets
-SPP Shifter extension & flipped shifter mod
-Fully Rebuilt Cylinder head (new supertech valve seals, hot tanked, lash adjusted, decked)
-Brand new Toyota OEM Multi layer metal head gasket
-ARP Head Studs
-Fully regasketed/resealed motor.(valve cover gaskets, intake manifold gaskets, cometic multi-layer exhaust manifold gaskets, throtle body gasket, front & rear main seals)
-Drift motion exhaust Manifold modded for t3 flange
-Precision SC61 Turbo
-Tial 44mm V-band wastegate
-stainless steel braided oil feed and return lines for turbo
-JDM 2JZ fuel injectors flowing at 520cc @48psi fuel pressure
-Aeromotive FPR w/ gauge set at 48psi
-Walbro 255LPH Fuel pump
-Tuned on AEM EMS standalone for 2JZ
-brand new 2jz water pump upgrade
-new timing belt & tensioner
-J3 DriftLab A/C Delete Kit w/ specific accs belt
-2JZGE accs belt tensioner (metal instead of plastic pulley)
-AICV Delete
-Driftworks Aluminum Water pump Pulley
-Driftworks Alum Power Steering Pulley
-NEW OS-GIKEN SuperSingle HD Clutch
-ChaseBays SSB Power steering lines
-Custom Aluminum Nascar style power steering reservoir
-Custom Coolant reservoir
-Custom Oil Catch can
-4Row custom aluminum radiator
-Mishimoto Rad Fans w/ shroud
-Samco silicone radiator hoses
-Mishimoto Low Temp Thermostat
-J3DriftLab custom front mount intercooler setup
-Blitz blow off valve
-V-band 3" Downpipe
-J3DL 3" straight pipe exhaust
-J3DL Oil pressure sending unit relocate kit
-SPP custom lower rad support to acomodate radiator and intercooler
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0049.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/580882_500067503340547_1788967099_n.jpg
SUSPENSION/BRAKES/WHEELS
-Blistein Coilover suspension
-SPP Rear Subframe Mounts Reinforcement Plates
-Eibach Front swaybar
-DriftTough Rear Camber Arms
-Complete ABS Delete
-All new hard lines (custom)
-SS brake line ends to calipers
-330ci front brake upgrade (rotors/pads/calipers)
-330ci differential w/ axles (welded by SPP)
-E36 M3 rear calipers and rotors
-330ci inner and outer tie rod ends (thicker)
-Breyton Wheels 18x9 +16 Front and 18x9.5 +16 Rear
-Hankook 225-40-18 Fronts 80%left and Nankang 275-35-18 Rears with about 50%left
-20mm hubcentric spacers on the rear w/ extended lug bolts
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0009.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0010.jpg
EXTERIOR
-Painted PaperWhite (2months old)
-Rear widebody ZG fender flares
-APR GT-500 Carbon Fiber HUGE Spoiler
-M3 style ricer mirrors
-Brand new windshield
-Brand new 330i front bumper
-Brand new 330i rear bumper
-Brand new 330i fenders
-Brand new 330i 2G hood
-Brand new 330i headlights
-Brand new clear corner lights
-S14 front bumper lights :D
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0002.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0012.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/s720x720/544645_500062313341066_2036844453_n.jpg
INTERIOR
-SPP Cage by CageDave
-Sparco Evo2 Racing seat
-F1 Racing passenger seat
-Sparco seat harness
-Generin passenger seat harness
-Autometer Oil Pressure gauge
-Autometer Boost Gauge
-Autometer Water Temp Gauge
-AEM Wideband gauge
-Apexi SAFC NEO used for its display
-generic quick release
-Casefab custom steering wheel short hub
-Nardi leather legit steering wheel
-fire extinguisher
-E-brake lever extension (works awesome)
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/396779_502266913120606_955221394_n.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN9999.jpg
Im sure I forgot to mention alot of parts but thats the most important things. Best of all is that you would never have to worry about rust on this car. Now remember this car is for RACE USE ONLY so dont expect to drive it on the street without getting pulled over.
Here is a quick video I found. More to come.
https://www.facebook.com/v/10151990837000347
Recent photoshoot album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/
Complete build album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/E46%20Build%20from%20day%20one/
Im only asking for $13,500 OBO (originally asking $18.5k) for the car or to trade for something nice I can drive on the streets. I already have a 1100whp R33 so im looking for something more practical. Contact me at 240-506-6858 TEXT PREFFERED!
I'm really looking into trading for a s15, g35, 350z or even a nice 240sx plus cash.
Please keep in mind as far as trade my car is worth way over what im asking for it, I have it posted way under what its worth in order for a fast cash sale.
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/318770_494966263850671_1737434612_n.jpg
http://i125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/DSCN0026.jpg
Here is the whole photobucket album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/
Complete build album: http://s125.photobucket.com/albums/p50/awd_s13/E46%20BMW%20DONE/E46%20Build%20from%20day%20one/