S13 Vert FULL Partout. Stance, Type X, PBM, Power FC, Z32 Brakes, etc.

[DustinSixOh9]

No longer just testing the waters and my old thread was filled.
If you are expecting anything shipped it will be my asking price plus however much the post office says shipping will be.
Tomorrow afternoon I will begin stripping the car down.

Located in Atlantic City, NJ.
Text at 609-287-54sixtwo.
Or PM me on here. I work 10 hours almost every day so I may not be able to respond right away. Local pickup gets preference over shipped offers.

Stance GR+ 10k/8k ~5000miles and one track event. $700

Z32 Brakes. Front and rear calipers, BMC, conversion lines, front rotors. $300

New 25mm 5x114.3 bolt on spacers SOLD

OEM Type X Bumper. SOLD
OEM Type X Fender Extensions
OEM Type X Bumper Support.
Type X Bumper Lights w/bulbs/sockets
FRP Type X Vanquish Lip, slight damage on underside from shipping.

OEM Chuki Sideskirts, primered. $250

17x9/10 Mustang SC Saleen Reps
215/40 and 235/40 Nankangs in great condition. Wheels aren't perfect, reads have teeth marks from tire machine in 4 places on each. SOLD

Power FC D-Jetro S13 Blacktop w/ Commander and sensors/harnesses. $800

Powered By Max HMIC S13 w/ T28. Fitting welded on for IAT. SOLD

Koyo rad. Beat up but works great. $100

Elite JDM Modded knuckles w/brand new LCA and S14 tie rods. $400

Isis rear suspension arms. $200

Full brand new 5lug. $175

Bride blue gradation low max knockoff from batlground. $200

Nagisa/nams auto side mount seat rail, driver side. SOLD

S15 BB T28 w/ HKS Actuator and tubular manifold. $600
S13 SR20 Motor set. Brand new harness, stock ecu, 550 injectors, hks 272 cams, new rear main seal, stock flywheel, act 6puck unsprung clutch, spec pressure plate, good trans. $1600, $2100 w/ s15 bb t28.

Great condition convertible top. $350

Drift Freaq's Yellow solid motor mounts. $50

Welded diff by Elite JDM $75

Powered By Max subframe risers. $75

2ft -6AN Line 90* swivel seal and straight swivel seal. $35

The shell will probably be going to scrap after being stripped of mostly everything. I will be parting out other parts of the chassis too, like the vert quarter windows, coupe doors, hood, etc. windshiel is perfect too.

Not testing the waters, this is a definite Partout.

[Adam496]

Sent ya a txt about the bumper

[Flatline1121]

coils shipped to 34652?

[DustinSixOh9]

Type x front and seat rail pending sale.

Shipping for the coils my guess would be around $30 but I'll get a quote when I'm free.

[Touge_Monster]

Pmd about the seat rail

[thefro526]

Dustin, I wuv you.

I want some stuff, I think. Holla at me on the FaceBooks.

<3

[IM1ACEHOLE]

Looking for rear quarter window switch for my vert. PayPal waiting.

[chan1234]

Coilovers shipped to 39532. Is it full 5 lug conversion? If so then that too.

[chan1234]

Also the mounts and welded diff. If you wanna text/call it's 2288608112

[LegendofChuki]

Looking for small rubber bum-stops from the doors I'll take all of them.
Thanks.

[ledippen]

sent a text about front and shell

[curb bound]

If u have s15 turbo by next week ill prob snag it damn i want that motor too but shipping would be arm and leg prob

[onthegrind]

"Elite JDM Modded knuckles w/brand new LCA and S14 tie rods. $400"
Are these still available?

[DustinSixOh9]

Onthegrind yes the knuckle/lca/tierod setup is still available.

Seat rail is SOLD
ISIS arms are as good as sold
Type X front will be gone as of Sunday.
Coils are possibly pending
Shell may be going too.

[Nissan206]

Coilovers shipped to 98058? I have PayPal ready. PM me.

[DreamN]

Any chance you have the convertible boot retainer? If so price and pix?

[Twinkies!]

I got money in hand for coilovers, shipping to 93560?

[turbo2nr]

how did you like the drift freaks mounts? was it really harsh?

[DustinSixOh9]

Seat rails, HMIC, and type x gone.


I haven't done any driving with the df mounts, sorry.

[whaapshh]

Thanks for the type x stuff! Bump for a cool ass dude and legit parts!

[caglej]

Pics of the knuckle setup?

Also interested in the PBM Risers and 5-lug. Pics and price for all 3?

[DustinSixOh9]

Wheels are sold.
Coilovers are still on hold.

Caglej I'm assuming that was you who texted me last night?

[DreamN]

Any chance you have the convertible boot retainer? If so price and pix?
So no chance on this? :mepoke:

[DustinSixOh9]

So no chance on this? :mepoke:

Nah sorry I don't

[DreamN]

http://i64.photobucket.com/albums/h170/mflissinger/sadpanda.gif

[My$800S14]

Isis rear suspension arms. (are these used? and if so how many miles?)

Full brand new 5lug. (does this come with rotors?)

Bride blue gradation low max knockoff from batlground. (please post picture)

Drift Freaq's mounts im interested in, and PBM subframe risers i would like a price on atleast those 2 item shipped to 32837, and im also heavily conscidering the Z32 brakes, is it 30mm or 26? aluminum?

[My$800S14]

and is this the vios III or the reclinable seat?

[holemilk00]

$100 shipped for the two rear interior panels??? If you have them in good shape.

[enkei2k]

Onthegrind yes the knuckle/lca/tierod setup is still available.

Seat rail is SOLD
ISIS arms are as good as sold
Type X front will be gone as of Sunday.
Coils are possibly pending
Shell may be going too.

Seat rails, HMIC, and type x gone.


I haven't done any driving with the df mounts, sorry.

Wheels are sold.
Coilovers are still on hold.

Caglej I'm assuming that was you who texted me last night?

2 bump limit. you can start a new thread in 3 days.


http://zilvia.net/f/sale-items/21037-sale-rules-guidelines.html


Ammendment:

If you make a thread, and then bump it twice.. if you are the only poster in the thread, I'm locking it.
I don't want to hear any crap over this.

Also, do not reply to your post saying:
"Replied to emails"
"Replied to PMs"
"email/PM sent"
"Added pics"
"Updated prices"
"Item has been sold"
or anything else that a viewer of the thread can figure out by looking at the thread.

These are all blatant forms of bumping.

If your thread has been updated, edit the title to say *updated*. Edit the original post. Don't tack on extra posts. The fewer users posting in your thread, the less slack I am going to cut you. Our users can and will search for parts. This necessity to get on the first page is rediculous.
-Jeff