Sexy Style/Show Up 180sx specs...

[Heartwork]

still trying to look for specs on these Panasports
iirc, it was mentioned that it was 17x9 +10 front, 18x10.5 +11 rear...

i dont see how 10.5 +11 in rear is possible on a STOCK/rolled fender on an S13

[DoriftoSlut]

No, its 17x9 +0 front with 20mm wide fenders and 215/40/17. 18x10.5 +11 R with 245/35/18. The rear only needs to be pulled 20-25mm to fit that. Seeing as how Show Up Asahi (shop that makes Sexy Style parts and supports Sexy Knights drift team) is also a body/paint shop, it would not be hard AT ALL to get that. Shit, I could get that with Aaron's fender puller. It wont look at nince, obviously, but it can be done.

There is another possibility that the car has 25mm or so overfenders that have been "smoothed in" to the body. I doubt this though, cause if you look at the curved glass on the rear 1/4 window the transition from that glass to the 1/4 pannel looks stock. Most overfenders are riveted on along that seam, making it difficuclt and well, impossible, to smooth that detail out to look like OEM again.

[mrmephistopheles]

Looks like OVAFENDA to me. :hsdance:

[nrcooled]

Looks like OVAFENDA to me. :hsdance:

The gas door is still flush though. Most overfenders that I have seen have the gas door resesed and not flush. Unless they are that good at Sexy Style

[Steeles]

a good body shop should be able to flush the gas door without much work. hell they did that good a job getting the overfenders on i doubt they had trouble

[red240]

If the shop knows what there doing they can mold them so they look stock, I've seen it done, also the gas door comes with and insert to flush the door but it rubs when you
open it ,that why most dont use it

[DoriftoSlut]

Yeah Kev, I saw that too. But the more i looked at the other pic (the head on one) the more it looked like a stock 1/4 panel. Meh. Probably is a 20 or 25mm overfender. FOr the record, it can be pulled and fit on stock fender though. The greenish Onevia has pulled rear fenders and some wheels that are the same spec as those Pana's.

[phanzy108]

what kind of body kit is that?
where can I get one...

[Steeles]

ummm the kit is sexy style... says so right on the car get it in japan. probably from show up asahi like doriftoslut said....

[phanzy108]

ummm the kit is sexy style... says so right on the car get it in japan. probably from show up asahi like doriftoslut said....


duhh.. like that was any help

[mrmephistopheles]

duhh.. like that was any help

It WAS help. You asked what kind of kit it was! WAKE UP ALREADY.

[jspecusa]

No, its 17x9 +0 front with 20mm wide fenders and 215/40/17. 18x10.5 +11 R with 245/35/18. The rear only needs to be pulled 20-25mm to fit that. Seeing as how Show Up Asahi (shop that makes Sexy Style parts and supports Sexy Knights drift team) is also a body/paint shop, it would not be hard AT ALL to get that. Shit, I could get that with Aaron's fender puller. It wont look at nince, obviously, but it can be done.

There is another possibility that the car has 25mm or so overfenders that have been "smoothed in" to the body. I doubt this though, cause if you look at the curved glass on the rear 1/4 window the transition from that glass to the 1/4 pannel looks stock. Most overfenders are riveted on along that seam, making it difficuclt and well, impossible, to smooth that detail out to look like OEM again.

1. Anyone notice the super negative camber?
2. Where the taill light meets the rear quarter panels, if there's a gap that's how you can tell overfenders.
Cheers,

Sam

[DoriftoSlut]

It WAS help. You asked what kind of kit it was! WAKE UP ALREADY.
Yeah no US distributor for SexyStyle (at one time a friends shop was going to but no more cause they closed... :( ) No need for a distributor anyways when you think about it. How many people would actually buy that? Not many. I love that bodykit more than anyone else i garantee it. But i cant afford to run it over on the track or in the streets. Fiberglass loses to curbs when they fight. It also loses to a 2600 lb car rolling over it. The retail prices are something like: $480 for the front bumper, $450 for the sides, and $460 for rear bumper. Something like that. IIRC it used to be $530, $500 and $520 but they recently went to lower pricing. hey its less than Vertex but its more than most stuff. Then add in shipping, stocking, tax, etc to US. eeek. Sounds like my Hotroad fiasco all over again.

[hondaguy]

1. Anyone notice the super negative camber?
2. Where the taill light meets the rear quarter panels, if there's a gap that's how you can tell overfenders.
Cheers,

Sam
thats what i told them sam :bs: that cars so sexy

[Steeles]

It WAS help. You asked what kind of kit it was! WAKE UP ALREADY.

Go easy on him Meph... he already proved he was incompetent when he asked that dumb ass question even though the info was right in front of him. remember he didnt choose to be retarded...a nd if he did he should be shot.