1000hp capable 2.2L sr20det for sale

[overdosedave]

A couple of years ago I wanted to build a 1000hp sr20det so I started.

The motor is an s14 sr..the mods are below

The head consists of hks step 3 head package (kelford 280 cams). Solid lifter, spring, retainers,
Supertech valves,
Head job by headgames.
Splitfire ignition.
Greddy intake manifold with q45 throttle body and spacer

The block has been bored to a 2.2L
Darton 90mm sleeves
CP pistons
Cosmetic head gasket…

Ive invested a lot of money into this motor and I know I am not going to get everything I invested however I am willing to take a reasonable loss.

The parts are too many to list but off the top of my head between labor and parts im pushing upwards of 20k. I am not willing to trade. Make an offer.

I am not willing to part out anything from the head nor the block. i will sell the head as a whole or the block as a whole. Parts like the splitfire and the intake manifold can be parted out..just make an offer.

my name is David and my number is 7325583397.

the shell this motor belonged to is also for sale on this forum:http://zilvia.net/f/cars-sale/471719-1995-240sx-s15-front-end-shell-sale.html

http://photos-h.ak.fbcdn.net/hphotos-ak-snc6/224734_947502460648_1270111717_a.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc6/255464_947502505558_480797095_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/195917_947502740088_1255693605_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/402967_947503129308_1736354196_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/292445_947503239088_25349988_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/386915_947503363838_2037925735_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/484578_947503428708_1364816090_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/400477_947503503558_178372113_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/393947_947503573418_1103879131_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/229158_947503688188_1055318222_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/378283_947503718128_664868503_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/555526_947503768028_322284233_n.jpg

[240sxx]

is the motor for sale

[Imarvin240]

Not trying to knock the thread at all, but how do you already have 20k in the engine? I mean, I purchased a sleeved and 100% completely built sr22ve-t from Mazworx for about half that and to my specs. Again, just curious, maybe you did spend that much :/

[future]

And by the way you won't get 1/5 of what you spent if oh really don't more the. 20k

[ForeignMuscle]

Not trying to knock the thread at all, but how do you already have 20k in the engine? I mean, I purchased a sleeved and 100% completely built sr22ve-t from Mazworx for about half that and to my specs. Again, just curious, maybe you did spend that much :/

Mazworx sells run of the mill forged det long blocks with no bolt on parts for 8 and 9 grand.. Was your engine used? You can look at my for sale thread and see how to spend $12k on an engine with a factory head.. Nice little list of prices next to every part for clarification.

I would really like to hear more on this fully built, sleeved, vet that you bought for $10k.

And by the way you won't get 1/5 of what you spent if oh really don't more the. 20k

OP, you can get $4k for it on a bad day. Don't give it away due to 99% of s-chassis owners being broke kids.

Give me a base price for the head. I'm not going to shoot in the dark.

[QuickSpoolSR]

what condition is it in currently, is it assembled?

[up in smoke]

The parts are too many to list but off the top of my head between labor and parts im pushing upwards of 20k.

:keke: If you think anyone will give you thousands of dollars for something that you won't even take the time to list the modifications, then you need to pass the pipe!

Also...


I would really like to hear more on this fully built, sleeved, vet that you bought for $10k.

http://www.mazworx.com/product/engine/nissan/nissan-sr20detsr20ve/complete-longblocks/street-series/mazworx-street-series-stage-11-sr20detve

By the time you add the VVL conversion kit and a stroker kit, you will be sitting at ~$10,000. This is assuming you have good cores (both the head and block) to send in.

[240boi115]

honestly looking at this i could buy a clean rb'd kouki at the price you might ask for this SR...but i am super curious.... you just built it but never used it correct? is it a complete engine???:confused: like nothing is missing except maybe the harness tranny and turbo? id just like to see the complete parts list on this sucker.

[DJ 21o3]

I agree, I am curious for a parts list..

[JdmOdz]

Bunpppppppp

[overdosedave]

mods please close this thread

[brndck]

Holy shit this thread is 7 months old, why are people even still digging in the graveyard ???

[DJ 21o3]

because he bumped it up not too long ago...lol