Can I use a KA24DE clutch master on my redtop sr20

[erraboards]

took a look on google and here couldnt find anything...

Im wondering if
Can I use a KA24DE clutch master on my redtop sr20???

i push my clutch pedal in and it sticks to the floor for approx. 3-4 seconds then it pops back up...

anyone give me some insite into what it is?
THANKS!!

[KiLLeR2001]

No. You cannot use a KA24DE clutch on an SR20DET.

Remove the clutch damper and rebleed your clutch line. Also make sure the slave cylinder isn't sticking.

[AdamR]

Since the above poster didn't read, yes you can use the master cylinder. That is a silly question, did you change it when you did the swap?
I am going to assume you are actually talking about the slave cylinder. I have been told they were different, but I don't know for sure.

[cmg]

Slave and master can be reused from the ka.

[KiLLeR2001]

I read it but I had a hard time believing someone would actually ask such a question.

Master and slave are interchangeable between KA/SR.

[Dorifto Machine]

erraboards: Read this thread :

http://zilvia.net/f/s-chassis/452658-clutch-slip-sr-swap.html

It will clarify your questions.

[erraboards]

yes sorry i ment slave cylinder.. haha was numb in the brain for a min there..

[Dorifto Machine]

Yep, your welcome erraboards