RS enthalpy question

[hamiltonbmx]

If I have the rs enthalpy tune and had it set would I need to send it back if I turn up the boost by 5psi its at 8 pounds now but want 13 pounds

[roboticnissan]

Yes. Msg lengtg

[hamiltonbmx]

I tryied to msg him but was not a user

[booey13]

http://zilvia.net/f/members/r-s-enthalpy.html

[hamiltonbmx]

Thank you very much messenged him now

[d_nice]

yea man good ppl their ask for martin

[di-devol]

If the tune is maf based, no, you shouldn't need a re-tune just for turning up the boost.

[S13alldayyo]

i orderd a rs enthalpy tune t25 with 370cc injectors does you know up to what psi in good for?

[hamiltonbmx]

Martin helped me out I have stock t25 and stock injectors and stock maf. Martin told me that I was good to run any boost. So contact him and ask and give him everything. Injectors etc

[S13alldayyo]

any boost level? with stock injectors and maf? i have a ka with a t25 and 370ccs N62

[hamiltonbmx]

But 370 is stock size so you should be okay with any boost. But I would contact him to make sure

[hamiltonbmx]

I'm not sure I have the Sr20 Idk if it makes a differece

[S13alldayyo]

ill ask him what boost pressure i can run, :)

[hamiltonbmx]

Yea I think he will say any boost but contact him he answered me in 4 mins.

[di-devol]

any boost level? with stock injectors and maf? i have a ka with a t25 and 370ccs N62

No, not any boost level, what the hell guys. 370's can only support a certain amount of boost. The tune will compensate for higher boost level, considering the size of injectors you are running. You can't just turn it up to 20psi lol, turn it up a couple psi, watch the wideband, if good, go a little higher. Just keep it safe.

[240sxfan6882]

I have one too, you can boost upto whatever level is safe for your injectors AND fuel pump. But it is up to you to determine how much that is. His tunes read off of the MAF to calculate fuel and ignition at any given level.

You need to re tune whenever you swap injectors, fuel pump sizes, and that stuff.

[hamiltonbmx]

Yea I wasn't telling him to turn it up to 30psi I private messenged him about boost levels I said I would use 8 pounds max 6 would be safe because he is not the rebuilding motor

[S13alldayyo]

I orderd my tune for 93 octane wich im getting my ecu tomorow through mail and i have 87 i think it was in my gas tank, will it run bad? Will it be bad for the turbo or engine components?

[di-devol]

Drive normal till you run out, then fill with 93.

[S13alldayyo]

Ok thanx :)

[S13alldayyo]

Yo i just got my tune and it came with 2 black wires? What do i do

[DanDriftS13]

What motor are you running? SR20DE or a SR20DET motor? If it's a DET why did you have the ecu tuned for the stock injectors/turbo etc...? If it's a DE ignore the last question but Martin generally tunes rather conservatively unless you are there in person and ask him to tune it for more power.... Either way though on a stock t25 no matter what you can not outflow the 370cc injectors so as long as the air fuel ratios are in the proper range (im assuming you have a wideband since you have a tune) everything should be honky dory just don't go past 13lbs because you will kill the turbo VERY quickly at more boost than that...

[hamiltonbmx]

I have a fully built motor so just need the tune was running like crap with out it now runs great

[Pinggg]

Yo i just got my tune and it came with 2 black wires? What do i do

It's to switch tunes..
Basically you can have a tune for E85 and 93 or whichever combo.
All you do is connect the wires and it goes on one of the tunes then if you leave it disconnected it's on another tune. That's how mine is setup.

[S13alldayyo]

He has either that for the switch or 2 step launch control, i got the 2step launch control so the wires are for 2 step

[S13alldayyo]

I have no clue how to set it up though he never sent it with instructions

[hamiltonbmx]

You need to contact them. They made your tune they will know what it is nobody on here. It's set for you not for them just you and your car