Tranny/clutch???

[240skate]

My clutch(i think????) was starting 2 slip, i thought no big deal and replaced it. Now it is still slipping. Im trying 2 figure out the problem. The clutch pedal seems to be too short, but i tried adjusting it. Any idea what could be wrong? (i have a stock KA for now, SR20 coming soon) Thanks!

[fliprayzin240sx]

Just cuz you tried to adjust it doesnt mean you adjusted it right...you need to adjust the engagement point to the middle. I bet its all the way to the top right now.

Also, what clutch did you change it to? Did you change the TOB too?

[240skate]

I've adjusted it to where my repair book says it should be. COuld it be my slave? I started noticing that i can pull the clutch pedal out a bit with my foot, and it will no longer slip. Im going to bleed or replace my slave in the next day or two. Could that be it?

[240skate]

And it was just an OEM clutch. Did new clutch, flywheel, and yes tob.

[240skate]

Did slave cyl, master cyl, new clutch, bled it twice just 2 make sure, STILL SLIPPING!!! I need some help. Is there anyway i could have put the clutch on wrong? it all went together easy. this is driving me crazy

[MrSanchez925]

Did u bench bleed your cylinder?

if your clutch is slipping,

Either your clutch or flywheel is toast
Air in your lines
Air in your CMC
Improperly adjusted clutch pedal.



How much freeplay do you have on your clutch pedal before the pedal meets resistance/pushes against the CMC rod?

[240skate]

Did u bench bleed your cylinder?

if your clutch is slipping,

Either your clutch or flywheel is toast
Air in your lines
Air in your CMC
Improperly adjusted clutch pedal.



How much freeplay do you have on your clutch pedal before the pedal meets resistance/pushes against the CMC rod?


I just replaced the clutch and the flywheel, like 2 weeks ago. it did it from day 1. How can you be sure there is no air in the lines or cmc? and there is about 1/4th of an inch of play. Ive adjusted it so much, i feel like ive tried everything