PDA

View Full Version : Door removel


Srjustin
07-26-2012, 07:45 AM
Hey guys so let me give u the story. I bought my car and it came with manuel doors but the kid that had it before me converted it to electric. And they dnt work so i got new doors. So im trying to take my passanger door off and cant find where u unplug the harness. Looks like it runs under the dash but where? I have looked everywhere but it dnt say where the harness goes it just talks bout how to take the door off. Help asap plz im trying to get the taged soon!

Sileighty_85
07-26-2012, 07:53 AM
if he used an OEM harness it should be 4 inchs past where it runs into the body tucked high up above the blower. Its really hard to see

Srjustin
07-26-2012, 10:47 AM
That sounds bout right it looks oem but what is the easiest way ti locate it/ unplug it?

Srjustin
07-26-2012, 10:49 AM
It seems like i would have to take the dash out witch i dnt want todo but if thats how u get to it i will.

Srjustin
07-26-2012, 11:14 PM
So how do i unplug it if i cant see it? Also im doing the driver door after this one. Am i going to run into a problem like this ? And how do u get the pin out of the little black bar in the door its between the hinges not sure what its called.

Chaluska
07-29-2012, 04:45 PM
i just tossed coupe doors on my vert, the "stay open rod" your talking about is held in by a small metal pin, that is filled with rubber. you just have to hammer it from the bottom, and it will pop out. a small screwdriver might help to knock it out.. i had to use pliars to wiggle it free.

http://chaluska.files.wordpress.com/2012/07/wpid-imag0885.jpg?w=500&h=836

as far as the harness, i just removed it from the door, there is is a pretty big rubber seal that holds the harness in the door, i pulled it out, and swapped it into the new door.

http://chaluska.files.wordpress.com/2012/07/wpid-imag0881.jpg?w=500&h=836

http://chaluska.files.wordpress.com/2012/07/wpid-imag0894.jpg?w=500&h=299

Srjustin
07-30-2012, 01:57 AM
Thanx man i already got the new doors in! Next question thoe . My seat belts dnt move now( the ones on the apller / roof witch wire is it cuz i didnt not re reun the harness or how can i bypass it? Idk if anyone will k ow this answer.