NoPistons!
07-25-2012, 04:20 PM
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/P072512_171001.jpg
This one to be specific. The gear above it comes off after you remove that crush nut and the actual gear my finger is on that i need comes off with a snap ring. I'm missing about 4mm off the face of it and ran into issues after i re-assembled and sealed it up. I didn't even notice anything was wrong with it until i tore it apart this time to see why it wouldn't go into any gear but 3rd and 5th. The input shaft wouldn't spin in any of those gears but neutral. Thinking this gear might be the culprit. nothing else looks out of place or missing.
The gear is shared by z31 na 71c and all 4 cyl s chassis 5 speed transmissions. I believe the r32 gtst uses it as well but not 110 percent on that.
Let me know if you have a good one.
Thanks.
This one to be specific. The gear above it comes off after you remove that crush nut and the actual gear my finger is on that i need comes off with a snap ring. I'm missing about 4mm off the face of it and ran into issues after i re-assembled and sealed it up. I didn't even notice anything was wrong with it until i tore it apart this time to see why it wouldn't go into any gear but 3rd and 5th. The input shaft wouldn't spin in any of those gears but neutral. Thinking this gear might be the culprit. nothing else looks out of place or missing.
The gear is shared by z31 na 71c and all 4 cyl s chassis 5 speed transmissions. I believe the r32 gtst uses it as well but not 110 percent on that.
Let me know if you have a good one.
Thanks.