MrMcgarrett
07-19-2012, 10:20 PM
PM me fro the fastest response.
Got a few misc 5spd swap parts.
Parts are used but in good condition.
Clutch master-$10
Clutch slave-$10
Clutch hardline-$10
Brake pedal-$20
Bell housing, flywheel and pressure plate bolts-$SOLD
White Bunny clutch setup-$100
http://i92.photobucket.com/albums/l5/MrMcgarrett/5spdparts001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutch001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutch002.jpg
FC RX7 oil cooler-$50
Cooler is in good condition, no leaks.
Some dents on the bottom and some bent fins.
Core measures 20inx4.5inx2in.
Has a built in thermostat.
Has 5/8in hose fittings.
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler004.jpg
SOLD
It's in good working condition.
Has the middle fitting installed.
ABS 1in BMC-40
It's in good working condition.
Will only work on ABS cars.
http://i92.photobucket.com/albums/l5/MrMcgarrett/1inbmc001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/1inbmc003.jpg
S14 ebrake cables-$20
http://i92.photobucket.com/albums/l5/MrMcgarrett/ebrakecables.jpg
S13 defrost vents-$SOLD
Both are in great condition.
No cracks or missing tabs.
Chuki bumper vents-$15
http://i92.photobucket.com/albums/l5/MrMcgarrett/chukivents.jpg
Chuki bumper center bracket-$20
http://i92.photobucket.com/albums/l5/MrMcgarrett/s13bumperbracket.jpg
Chrysler intercooler-$30
Core measures 11.5inx6.5inx3in.
17in from end to end.
2in inlet and outlet.
http://i92.photobucket.com/albums/l5/MrMcgarrett/intercooler002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/intercooler001.jpg
K&N drop in filter-$15
Cleaned and re oiled with the K&N cleaning kit.
http://i92.photobucket.com/albums/l5/MrMcgarrett/KNfilter004.jpg
Z32 sideskirts-$40
These are for a 2 seater model.
http://i92.photobucket.com/albums/l5/MrMcgarrett/100_6524.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/100_6525.jpg
DIN pockets-$15 each
One has a flip down door and the other slides out.
Slide out has a woodgrain front.
http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpockets001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpockets002.jpg
Got a few misc 5spd swap parts.
Parts are used but in good condition.
Clutch master-$10
Clutch slave-$10
Clutch hardline-$10
Brake pedal-$20
Bell housing, flywheel and pressure plate bolts-$SOLD
White Bunny clutch setup-$100
http://i92.photobucket.com/albums/l5/MrMcgarrett/5spdparts001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutch001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutch002.jpg
FC RX7 oil cooler-$50
Cooler is in good condition, no leaks.
Some dents on the bottom and some bent fins.
Core measures 20inx4.5inx2in.
Has a built in thermostat.
Has 5/8in hose fittings.
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/RX7cooler004.jpg
SOLD
It's in good working condition.
Has the middle fitting installed.
ABS 1in BMC-40
It's in good working condition.
Will only work on ABS cars.
http://i92.photobucket.com/albums/l5/MrMcgarrett/1inbmc001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/1inbmc003.jpg
S14 ebrake cables-$20
http://i92.photobucket.com/albums/l5/MrMcgarrett/ebrakecables.jpg
S13 defrost vents-$SOLD
Both are in great condition.
No cracks or missing tabs.
Chuki bumper vents-$15
http://i92.photobucket.com/albums/l5/MrMcgarrett/chukivents.jpg
Chuki bumper center bracket-$20
http://i92.photobucket.com/albums/l5/MrMcgarrett/s13bumperbracket.jpg
Chrysler intercooler-$30
Core measures 11.5inx6.5inx3in.
17in from end to end.
2in inlet and outlet.
http://i92.photobucket.com/albums/l5/MrMcgarrett/intercooler002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/intercooler001.jpg
K&N drop in filter-$15
Cleaned and re oiled with the K&N cleaning kit.
http://i92.photobucket.com/albums/l5/MrMcgarrett/KNfilter004.jpg
Z32 sideskirts-$40
These are for a 2 seater model.
http://i92.photobucket.com/albums/l5/MrMcgarrett/100_6524.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/100_6525.jpg
DIN pockets-$15 each
One has a flip down door and the other slides out.
Slide out has a woodgrain front.
http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpockets001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpockets002.jpg