Z33(350z) to SR20 Transmission Adapters!

[maverickmotorsports]

$430 shipped for the adapter plate!

Z33 Transmission to SR20 Adapter!


http://i239.photobucket.com/albums/ff70/riashly/IMG_0058s.jpg


Hey Zilvia! We had a really good response to the original thread (http://zilvia.net/f/drivetrain/357396-z33-sr20-transmission-adapters-4-available.html) and we just got more adapters in!

These are the new Version 2 adapters. The new plates have a slight modification which allows a little more clearance with bottom mount turbos.

So why a Z33 transmission? Keep reading!

The gearing is superior to an SR/KA/Z32 transmission. All of the gears are shorter now so you won't find yourself stuck between 2-3 gear on courses any more. You can now leave it in 3rd gear and rip! Not to mention having a 6 speed transmission that is tough and not made of glass like any SR/KA transmission!

This transmission is also significantly stronger. There are local 9 second Z33's that have yet to blow a trans. STOP BREAKING STOCK TRANSMISSIONS! Check out the gear size comparison!

http://img.photobucket.com/albums/v229/sil8ty/TransComparison.jpg

http://img.photobucket.com/albums/v229/sil8ty/TransComparisonSide.jpg


You will retain your SR Clutch/Flywheel. You do not need a Z33 clutch.

What you need for the swap:

-Adapter plate
-Transmission mount
-Driveshaft
-Shortened shifter bracket
-Modifying Z33 Bellhousing
-Stainless steel clutch line. There are many vendors out there who sell these.

Pricing:

Just the plate and hardware is $430 shipped

Additionally other mods are available in stages depending on what you want to pay for.

Bellhousing Machining. Not just any machine shop can do this because of the size of the bellhousing. $80 +ship

Shifter modification. You send in your shifter and it gets modified then sent back to you. $125 +ship

Transmission crossmember. You can retain the original rubber mount(aftermarket mounts will also work). $100 +ship


http://i239.photobucket.com/albums/ff70/riashly/IMG_0059s.jpg

http://i239.photobucket.com/albums/ff70/riashly/_MG_5376ss.jpg

http://i239.photobucket.com/albums/ff70/riashly/Picture139.jpg

http://i239.photobucket.com/albums/ff70/riashly/Picture140.jpg

http://i239.photobucket.com/albums/ff70/riashly/Picture144.jpg

A video of the first drive.
12422291

The two-tone s13 in front has the Z33 trans installed.
15950397

ImportTuner feature on the car we did the prototyping on.
14985205

Once this is done, you become rad!

Contact:

Feel free to contact me through;
PM
[email protected]
five two zero 444-4415

Thanks, George

[heyitzalan]

if i buy these stuff, where can i get the driveshaft from? i have a s13 sr in a s14 chassis.

[Black240Ct]

if i buy these stuff, where can i get the driveshaft from? i have a s13 sr in a s14 chassis.

i did this trans swap and after i got the trans in with the crossmember made and such i measured the length from the trans to the diff.. called drive shaft shop.. or some shop like it (i forget the name) said i needed a z33 input with 240sx diff side and the length and they made one for me.. one piece steel was about $250

[GrimDrifter]

i have this tranny but without a shifter bracket. Can i buy a modified one from you, or do i need to locate one first?

[chino38]

is there an adapter for a KA engine?

[K_style]

So it's pretty much $735 + Tranny for complete swap then?

[Lynk444]

How do you make it so the stock speedometer works on a S13 or S14? That is what is holding me back on this.

[maverickmotorsports]

is there an adapter for a KA engine?

We have a completed prototype but we've been having trouble finding someone locally to do test fitting for us.

So it's pretty much $735 + Tranny for complete swap then?

$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.

How do you make it so the stock speedometer works on a S13 or S14? That is what is holding me back on this.

You would need an ABS diff with the dakota digital speedo conversion box. Alternatively you can also use the S15 diff.

[turbo2nr]

i heard that the starter and flywheel doesn't line up with the ka/z33 setup? did you find a way around this??

[LoFoSho]

$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.

What's the turnaround time and what does return shipping usually cost for everything???

I PM'd you this question and I never heard back from you when I asked if you had these in stock a few weeks back.

[maverickmotorsports]

i heard that the starter and flywheel doesn't line up with the ka/z33 setup? did you find a way around this??

The bellhousing interferes with the starter nose. You just need to cut a small scallop out of the bellhousing to get it to fit. There are no issues with the flywheel since you'd be using the KA starter and flywheel.

What's the turnaround time and what does return shipping usually cost for everything???

I PM'd you this question and I never heard back from you when I asked if you had these in stock a few weeks back.

Everything is in stock right now. Typical turn around is 2-3 days. Sometimes it might be quicker or longer depending on how busy we get.

[Michael E]

I need one for a ka24de/Z33 trans. Wish you were closer you could use mine as a prototype

[GrimDrifter]

We have a completed prototype but we've been having trouble finding someone locally to do test fitting for us.



$755 includes the adapter, hardware, bellhousing mod, shifter relocation, trans crossmember, and clutch line. Shipping would be added on top of that to ship the completed kit back to you.



You would need an ABS diff with the dakota digital speedo conversion box. Alternatively you can also use the S15 diff.

It's not easy to find an s15 diff, I've been looking.

[Bolf]

Hi George , what is the situation in using this with a s15 flywheel and clutch ?

Thanks

[maverickmotorsports]

Hi George , what is the situation in using this with a s15 flywheel and clutch ?

Thanks

Replied to PM.

[TougeKid1]

wait are the gear ratios from the Z33 same as the z32/sr/ka trans?

[street240sx]

Time to go work on my car so I could possibly help test ;)

As for the ratios you can look them up. Z33 gears are closer together and overall a little short that's why I'm going q45 ratio

[maverickmotorsports]

Gear ratios are not the same. Everyone likes them better for drifting because they are spaced better.

350z/G35:

1st Gear Ratio: 3.794:1
2nd Gear Ratio: 2.324:1
3rd Gear Ratio: 1.624:1
4th Gear Ratio: 1.271:1
5th Gear Ratio: 1.000:1
6th Gear Ratio: 0.794:1

SR20:

1st Gear Ratio: 3.321:1
2nd Gear Ratio: 1.902:1
3rd Gear Ratio: 1.308:1
4th Gear Ratio: 1.000:1
5th Gear Ratio: 0.759:1
6th Gear Ratio: N/A

As you can see, the Z33 3rd gear is like a "2.5 gear" on the SR. Most guys with SR transmissions find that they are either sitting on the limiter in 2nd and not getting enough wheel speed or bogging out in 3rd and not spooling up the turbo. The Z33 trans has 3rd gear with is much better geared for the SR20 powerband.

[ExtremeD]

gears are nice and all but what about how strong it is. how much hp and abuse can it handle?

[maverickmotorsports]

There are local Z/G cars doing 900whp on slicks. They keep breaking the diffs. The transmissions are fine.

Our test vehicle has 550whp, 12" wide VIP wheels, and hasn't blown a Z33 trans in 2+ years. Constant abuse and drifting as well.

[JFoxx]

what exactly needs to be machined on the bell housing? and how would i place an order for 1?

[maverickmotorsports]

The bellhousing needs to be milled down to assure that the input shaft goes into the pilot bearing.

You can place an order by sending payment via Paypal. PM sent.

[ZacKisBacK_Fr]

I need this, I saw a CD009 brand new for a good price on the board so I would do the swap. PM me the price for everything needed for an easy install shipped to France 01170.
You don't need the gear box right?
Thank you

[JUNSupraTT]

I need this. sent pm for detail. Thanks.

[ZacKisBacK_Fr]

Same here, anyone around?

[EsChassisLove]

I can't wait to blow my SR tranny and justify this haha

[ZacKisBacK_Fr]

already my second OEM gearbox this season, I really need something that won't break!! :-(

[JUNSupraTT]

payment sent. check out your paypal account and my pm george!

[JUNSupraTT]

any update for my order yet? :-)

[edpogi]

Give George a little time to recover from Fd. He'll get back to you. Very good guy to deal with.

[nholland1187]

What about shifter location looks like on joe haven's s13 it's pretty far back have y'all made it to where it's more in the middle?

[Seraphim38]

what's the latest; are these kits still available?

I am building a 500rwhp +/- SR setup with a triple carbon clutch and fear that my stock SR trans won't last long even in daily driving (no clutch kicking or drag racing). While I have a functional no grind transmission now, I am thinking ahead.

[Sofa King]

Do you have trans crossmembers for s14? I am planning on swapping one into my s15 so I can stay 6speed.

[Riodcs]

Do u have ka adapter plate for 350z trans ?

[zo0d]

Bump for info on Ka adapters.

[98_240_KA]

^^^ + 1

Sent from my SPH-D700 using Tapatalk 2

[maverickmotorsports]

http://zilvia.net/f/drivetrain/527212-ka24-350z-z33-adapter-plates-stock.html

KA plates are in stock! SR plates are in stock!