Power Steering Banjo Bolt.

[nandom]

does anyone know if the Banjo bolt, to the power steering, for an S13 the same for the red top sr and the ka engine??

[Banana_Cute]

Yes. The two pumps are actually interchangeable if you remove the pulley.

[nandom]

awesome thanx

[KiLLeR2001]

Yes. The two pumps are actually interchangeable if you remove the pulley.

Incorrect. They use different banjo bolts.

http://zilvia.net/f/tech-talk/302618-sr-ka-power-steering-pump-switcheroo.html

[Banana_Cute]

Breeze through "banjo bolt"


LOL. Whoopsies.

[titangts]

yes, the pumps are identical, but use EVERY bit of hardware from the SR on your Ka pump. or vise versa

bolts, brackets, pulleys..all that switches over to your "new" PS pump.

[vinnyjdm]

--bringing this back from the dead

did anybody figure this out? I have a KA-T and my intake won't fit because of the banjo fitting for the high pressure line. I bought an isis power steering high pressure line thinking it would screw right into the pump eliminating the banjo fitting completely. I realized that it does not. Does anybody know if a banjo off a different car will fit or if theres a fitting or something that could bolt directly into the pump?

[w0nderbr3ad]

I used a fitting and and my high pressure ps line with an fitting. I can look it up for you later after work if someone doesn't reply before then.

EDIT: I used Russell 670531 and used that on the pump. Just be sure to reuse the washer.

[vinnyjdm]

I used a fitting and and my high pressure ps line with an fitting. I can look it up for you later after work if someone doesn't reply before then.

you used a fitting that deleted the banjo?

[w0nderbr3ad]

you used a fitting that deleted the banjo?

Yes.

http://i690.photobucket.com/albums/vv264/w0nderbr3ad_s13/s13/turbo%20project/B0E47FD6-AC8A-4411-BA55-3C6698355380-1430-000000D91A97AB5C_zps12c78245.jpg